Sony XB20 Bluetooth Pairing Instructions

An iPhone with a Sony SRS XB20 speaker.

This post gives Bluetooth pairing directions for the Sony XB20 wireless speaker to common devices such as the Apple devices like the iPhone, iPod Touch, and iPad. This routine also works for Android devices too, such as Samsung and LG phones, and Amazon Fire tablets.

Sony XB20 Bluetooth Pairing, Step by Step Instructions

With your SRS XB20 powered OFF (power button is dark), run through this routine to pair it to your source BT mobile device. We’re using an iPad Air computer for this demo.

1. Go to the Home Screen on your Source Device

Firstly, press the Home button to reveal the smart device’s Home screen.

2. Find the Settings App

We found ours on the second page of the Home screen, as shown next.

iOS Home Screen with Settings App Highlighted

3. Bring up the Settings App

Thirdly, touch the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

4. Go to the Bluetooth Settings Page to Continue with Sony XB20 Bluetooth Pairing

The Bluetooth Settings screen appears as follows. Note that our Bluetooth is enabled here. But since our test XB20 is currently shut OFF (is not in BT discovery mode), it does not show up in the devices list. Also, we don’t see it since we’ve never paired this speaker with our mobile device before.

iPadOS -Bluetooth Settings- page showing nothing discovered

5. Turn On your Sony SRX XB20

Turn on the speaker by quickly pressing its Power-Pairing button. See this, pointed at by the aqua arrow, in the next picture.

The -Power- button.

The unit then powers up, and its Power-Pairing button glows white, as we see in the next picture.

The Power lamp glowing on the Sony XB20.

But since our tablet does not know about this speaker, the XB20 will not pair with it automatically.

6. Put the SRS XB20 in Discovery Mode

Now, to see the speaker on your source device, place it into Bluetooth pairing mode. To accomplish that thus, press and hold the Power-Pairing button, and release when you hear the rising pitch beep sequence and the speaker announces, “Bluetooth pairing,” in a lady’s voice. Find the Power-Pairing button as pictured above.

In addition to the voice announcement, the Bluetooth Status lamp starts flashing fast white, as we see next.

The Bluetooth Status lamp glowing.

7. Find the Speaker on your Mobile Device to Continue with Sony XB20 Bluetooth Pairing

See the screen shot next. We found our SRS XB20, as pointed at by the green arrow.

The iPadOS Bluetooth Settings page, showing the Sony XB20 as discovered.

8. Now Pair with the XB20

Tap the listed speaker in the discovered devices list.

Your mobile device then pairs with the Bluetooth speaker.

E.g. The the mobile device’s Bluetooth Settings screen might then change to look something like the following. Note the now-connected SRS XB20 entry, as pointed at by the green arrows in the next screenshot.

The iPadOS Bluetooth Settings page, showing the Sony XB20 as Connected.