The SRS XG300 Sony wireless speaker is a medium power, portable boombox system with enough output music watts to fill a run-of-the-mill living room or yard with big sounding tunes.

But what does the number of watts a wireless speaker has, tell us about how good it is?  Firstly, the watt is a measure of how much power the speaker consumes or outputs.  Plus, this metric is a convenient comparison measure. E.g. Generally speaking, speakers with more watts of audio output play louder than those with less.  And while they do cost more, have bigger, heavier batteries and chargers, along with larger drivers and magnets, they nonetheless offer greater dynamic range, have a deeper bass response, and the models that do stereo offer typically a bigger soundstage and better imaging to listeners.

Front view of the Sony XG300 party boombox speaker.

Thus in general, the more powerful the speaker, the better it sounds, even at lower volume. You get improved crispness due to higher accuracy reproduction of the bass, midrange, and treble musical content. More reserve power often means less clipping artifacts too. So, the speaker’s max watts output is a primary indicator of speaker quality and performance.  And as such, this value is of great interest to audiophiles and novice listeners alike.

In this case, the Sony XG300, as a common sized portable BT speaker, is a decently loud model for all the bigger it is. Its watts can fill a room with clean sounding music. See below for details on its power output.

Sony XG300 Watts Output: Details

    1. Battery Capacity: 37.44 watt-hours (7.4 volts, 5.2 amp-hours).
    2. AC Charger Power: 15 watts (5 volts at 3.0 amps).
    3. Bluetooth Standby Mode Power: Less than 0.3 watts.
    4. Total Audio Output Power on AC (RMS): 16 watts.
    5. Total Peak Audio Power (both channels): 22.62 watts.
    6. Output Power per Channel: 8 watts RMS.
    7. Audio Output Power on Battery: Decreases as battery approaches depletion.

Sony XG300 Watts Output: Other Notes

    1. The system tries to conserve battery power as the battery get close to total depletion.  The XG 300 does this by reducing the audio output power somewhat.
    2. This speaker may not get enough enough power from the AC power adapter to keep the battery from discharging when playing at full volume, depending on what you’re listening to.  So it’s possible that even with the unit plugged in, you could still see it shut OFF unexpectedly.  Thus on the (rare) occasions that this occurs, just stop playing the 300 for an hour or two, to let it build up some reserve power while charging. Then, start it up again for continued party fun.

Other Sony XG300 Posts

    1. How to Connect to Sony XG300
    2. Sony XG300 Reset
    3. How to Tell if Sony XG300 is Charging
    4. Sony XG300 Specs
    5. Sony XG300 Software Update Instructions

Related Posts to Sony XG300 Watts Output

    1. Sony X2 Watts Output
    2. Sony X11 Watts Output
    3. Sony XE200 Watts Output
    4. Sony X3 Watts Output
    5. Sony XB01 Watts Output

References

    1. Official Sony XG300 Support Page
    2. Where to Buy the Sony XG300

Revision History

    • 2023-04-02: First published.
admin

Recent Posts

Wonderboom 2 Won’t Turn ON or Charge

Most Bluetooth speakers, including the Wonderboom 2, offer truly portable operation via their lithium ion…

6 hours ago

Wonderboom 3 Check Battery

Shows the Wonderboom 3 check battery procedure, and also, how to tell if the battery…

7 hours ago

Wonderboom 2 How to Pair

Describes the Wonderboom 2 how to pair routine, to get it playing from your phone,…

7 hours ago

Check Wonderboom Battery

Gives the check Wonderboom battery routine, and also, how to know if the battery life…

8 hours ago

Wonderboom 2 Reset Instructions

Gives the Wonderboom 2 reset instructions, which return it to its factory default settings. Resetting…

8 hours ago

How to Turn OFF Wonderboom 3

Explains how to turn OFF Wonderboom 3 here. Now most speakers have a Power button…

8 hours ago