Tag: KBL Go 3
-
JBL Go 3 Charge Time
To get the shortest JBL Go 3 charge time, use at least a medium current USB charger. JBL Go 3 Charge Time: How Long to Fully Recharge According to the specs, the time it takes to charge this speaker is two hours and thirty minutes (2.5 hours). This is using a 5 watt charger (5…
-
JBL Go 3 Watts
The JBL Go 3 is a low power, hand-held style speaker with still enough watts to fill a small room with decent sounding tunes. It provides 4.2 watts of RMS audio output power. So it’s plenty loud enough for personal use either indoors or outdoors. But what do the watts a speaker has, tell us…
-
JBL Go 3 Battery Life
The battery life on the JBL Go 3 Bluetooth speaker we discuss in terms of either how long the speaker will play after a full charge, before going dead again. Or, how long the battery will last before a battery replacement is necessary. JBL Go 3 Battery Life: Per Charge How long should the battery…
-
JBL Go 3 Factory Reset
We cover here the JBL Go 3 factory reset instructions, to restore it to its default manufacturer settings. Plus, factory resetting erases any earlier paired Bluetooth devices from the speaker’s memory. Clearing these stops the speaker from pairing to any nearby Bluetooth devices afterwards. Also, you might factory reset to make the speaker ready or…
-
How to Adjust Volume on JBL Go 3
There are a few ways for how to adjust volume on JBL Go 3 mini speaker. These depend on the app(s) you’re playing from mostly. Many apps provide volume adjustment controls. But this JBL speaker itself has two buttons for volume control besides. Find these (the + and -) buttons on its top side. Note…
-
JBL Go 3 Charger
An adequate JBL Go 3 charger is a USB wall or auto charger adapter that delivers enough stuff to fully recharge this speaker in the least amount of time (around 2.5 hours). Note that currently, JBL does not include a USB charger with the Go 3. So, you’ll need to get one. Also, the speaker…
-
JBL Go 3 Blinking Red Light
Many JBL speakers, including the Go 3 mini model, have a blinking red light on the right side when the battery is almost out of power. Sometimes though, this red LED lamp flashes for long periods as you play the speaker. E.g. It begins pulsating during play and does not stop, even when you connect…
-
How to Tell if JBL Go 3 is Fully Charged
Here, we explain how to tell if the JBL Go 3 is fully charged. This way, such that you get maximum playing time from it when you take it on little jaunts around town. It would be handy to know this though, to avoid losing speaker power while on your jaunt. Now the unit has…
-
JBL Go 3 Hard Reset
We cover here the JBL Go 3 hard reset instructions, to restore it to its default manufacturer settings. Plus, hard resetting erases any earlier paired Bluetooth devices from the speaker’s memory. Deleting these stops the speaker from auto connecting to any nearby Bluetooth devices afterwards. Also, you should hard reset to make the speaker ready…
-
JBL Go 3 Battery Capacity mAh
Here we list details about the battery inside the JBL Go 3 tiny personal Bluetooth speaker, including capacity, dimensions, mAh value and play time. Plus, the mAh or milliamp-hour value tells us how long the battery will supply enough juice based on amount of current drawn from it. Explicitly, the mAh figure tells us how…