This post offers general UE Roll pairing directions. Start with your Ultimate Ears speaker (UE) powered OFF (all dark back panel LEDs). Then, follow these directions to pair it with most any Bluetooth device. In this demo, we show how this pairing works on our iPad Air mobile computer. But a similar routine works for other iOS devices, and Android phones and tablets as well.
Press the Home button to get to the Home iPad page. See our Home screen as shown next.
We found ours on the second page of the Home screen on our tablet.
Tap the Settings app icon.
The device then puts up the first page of its Settings screen, as shown in the next screenshot
Tap the Bluetooth item, as pointed at by the dark green arrow in the last screenshot above.
Our Bluetooth Settings screen then appears as follows. Note that our Bluetooth is switched ON here. But since the UE Roll speaker is currently OFF, it does not show in either the My Devices or Other Devices lists on the tablet yet, Why? Because we’ve never paired it with this device before. Plus, the speaker is not yet broadcasting its BT connection info. See this case, that looks something like as shown next.
Note in this picture that there’s no UE Roll listed yet.
Turn on this UE by quickly pressing its Power button. See this button, pointed at by the green arrow, in the next picture.
The speaker then comes on.
Now, to see your UE Roll on your tablet / phone, place the Roll into BT pairing mode. For that, press and release the Bluetooth button, as highlighted in the next picture.
When you press this Pairing button, the speaker makes several tapping-on-bongos sounds. Plus, an LED in this button starts quickly flashing white. See this in the last picture above.
See the picture next. We found ours, as circled in green.
Tap the listed speaker in the Other Devices section of the Bluetooth Devices list, shown above.
Your device then pairs with the Roll (appears as “UE Roll” in this demo).
The Bluetooth Settings screen then changes to display something akin to the following.
Note that the UE speaker now shows as connected, as circled inside the green oval in the last picture.
We have finally paired our UE Roll with a typical mobile device successfully. Audio output from that device now plays on this wireless speaker, which, we hope, is what you want.
If you installed more than a few thermostats, you're likely to have come across many…
Gives the Factory Default Reset Honeywell WiFi Thermostat RTH8580WF procedure. Now this resetting clears out…
This is our Honeywell RLV310A Line Voltage Baseboard Heat Thermostat Review. Now we purchased two…
This is our Review of Honeywell RLV310A Line Voltage Thermostat. Now we purchased two of…
In this post, we show how to calibrate Honeywell thermostat, model RTH9580WF. Now why would…
The JBL Xtreme (Extreme) comes with an AC charger cord, discussed all about it here. …