Picture of the Wonderboom 1, front top view. Showing the -Power- and -Volume DOWN- buttons.

UE Wonderboom Factory Reset Instructions

Here, we demo UE Wonderboom factory reset instructions, which restore the factory default settings.  This works as follows.

Factory resetting wipes any memorized Bluetooth devices from the unit’s memory. Thus, this prevents the UE Wonderboom from pairing to any nearby Bluetooth devices after the factory reset. Further, you might reset the speaker to re gift it.  Or, you just wish  to stop its auto pairing with devices you no longer play through lt.

UE Wonderboom Factory Reset Instructions: Step by Step

1. Turn on the UE Wonderboom

Press and release the  Power  button.  The status lamp in that button lights and you hear a power-up sound. We circle the  Power  button in the next picture.

Picture of the UE Wonderboom top view. Showing the dark -Power- button.
The UE Wonderboom top view. Showing the dark -Power- button.

Then, the status light comes on solid or it blinks, as shown next.

Picture of the white glowing -Power- button, just prior to factory reset.
The white glowing -Power- button, just prior to factory reset.

2. Wait for the Power Up Sound

The UE Wonderboom makes a unique sounding turn-on noise. The speaker is then ready for factory reset when this sound ends.

Now it may or may not pair with a device.  That depends on whether you have any in-range Bluetooth devices that know about the UE Wonderboom and that it have previously paired with as well.  Yet whether paired or not, this factory reset procedure works the same way, as follows.

3. Be Sure the UE Wonderboom is Not Connected with Anything

The UE Wonderboom does not appear to respond to factory reset requests while linked with a source Bluetooth device. So, unpair it before factory resetting.

4. Press the  Power  and the   Volume DOWN  Button Together for Up to Eight Seconds

Find the  Power  and Volume DOWN   buttons.  E.g. The   Power  button is on the top of the speaker, near the front.   Volume DOWN   is the long vertical line on the front, near the bottom.  See these both that we point out with the green arrows in the next picture.

Picture of the -Power- and -Volume DOWN- buttons. Press these at the same time to factory reset this UE Wonderboom.
The -Power- and -Volume DOWN- buttons. Press these at the same time to factory reset this UE Wonderboom.

 

The UE Wonderboom then enters factory reset.

Next, in a few seconds, the unit powers off as the hard reset completes. The falling electronic ka-plunk sound plays. Finally, the status lamp in the  Power  button goes dark.

5. Check That These UE Wonderboom Factory Reset Instructions Worked

Next, power on the UE Wonderboom again, as detailed in step 1 above.

After a factory reset, the UE Wonderboom comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.

6. UE Wonderboom Factory Reset Instructins Now Complete !

Hard reset is done now. So go ahead and let a friend or stranger use this speaker. Or pair it again with your favorite Bluetooth devices.

Then, the UE Wonderboom no longer auto connects with any previously paired Bluetooth devices. Thus, to restore automatic BT pairing, you pair this speaker by hand with your desired device(s). After that, any time that both the UE Wonderboom and device have Bluetooth turned on, pairing again occurs without you having to do anything.

Don’t forget to delete any now-stale connections to UE Wonderboom from your source Bluetooth devices that you set up prior to factory resetting the speaker.  These will no longer work.  So you’ll want to “forget” them in your source device’s settings pages.

Other UE Wonderboom Posts

    1. Power Button Not Working Fixes
    2. Won’t Charge Troubleshooting
    3. How to Connect to iPhone
    4. Won’t Turn ON Fixes
    5. Buttons Guide

References for UE Wonderboom Factory Reset Instructions

    1. Official UE Wonderboom Support Page
    2. Where to Buy the UE Wonderboom