Ultimate Ears Wonderboom 2 Connect 2 Speakers

A Wonderboom 1 and a Wonderboom 2 side by side.

Explains the Ultimate Ears Wonderboom 2 connect 2 speakers routine, so that they both play the same audio content from one source device. In this demo, we use one Ultimate Ears Wonderboom 1, and one Ultimate Ears Wonderboom 2 to show how this works. You can indeed mix and match.

Ultimate Ears Wonderboom 2 Connect 2 Speakers: Step by Step

1. Power Up Both Wonderbooms

We show the Power buttons on each of our Wonderboom units in the next pictures.

Press and release the Power button on the first one, and await the power-ON sound.

The Ultimate Ears Wonderboom 1 top view. Showing the dark -Power- button.

Then, press and release the Power button on the second Wonderboom, and again, wait for it to come on.

The Top of the Ultimate Ears Wonderboom 2. Showing the dark -Power- button.

2. Connect the First Wonderboom with a Phone or Other Bluetooth Device

In this demo, we’ll first link the Ultimate Ears Wonderboom 1 with our iPad Air tablet. Now perhaps you’re not sure how to do that. If so, then see our How to Pair 1 Ultimate Ears Wonderboom 1 Speaker post for details.

3. Press and Release the Play / Pause Button on the First Speaker to Continue with Ultimate Ears Wonderboom 2 Connect 2 Speakers

Next, press the middle (Play / Pause) area of the Wonderboom 1 you just connected with your BT source device. Hold until the speaker makes a connect sound and the Bluetooth lamp starts fast-flashing. Here, our first speaker is the original Ultimate Ears Wonderboom 1 (the first version of this series). And in the following picture, we show where to press.

The Ultimate Ears Wonderboom 1 top. Showing the -Play-Pause- button.

4. Press the Play / Pause Button on the Second Unit

Next, press and release the middle area of the second Wonderboom. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.

Top view of the Ultimate Ears Wonderboom 2. Showing the center button.

The speaker then makes a ready-to-connect sound. Also the Bluetooth light just above the center button blinks briefly. Then, once this speaker connects, its Bluetooth lamp glows steadily.

5. Done with Ultimate Ears Wonderboom 2 Connect 2 Speakers !

Your two Wonderbooms now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both Wonderboom models.

The two models side by side.

Note that each Wonderboom provides stereo sound. Furthermore this holds true even when you have two of them joined to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first Wonderboom plays the left channel and the second plays the right. Both play both channels, in stereo, in fact.

Ultimate Ears Wonderboom 2 Connect 2 Speakers: Ending That Connection

To break the connection, simply power down the second speaker. After that, the first one (the one that you connected with your Bluetooth device) continues playing.

Now powering down the first one will also break the connection between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.