Ultimate Ears Wonderboom 2 Setup Instructions

This post offers general Ultimate Ears Wonderboom 2 setup instructions, to get the unit playing music from your phone, tablet, or other Bluetooth source device. First, of course, for new speakers, unpack them and make sure that they have some charge in their batteries.  Then, with the 2 turned OFF (all dark top panel LEDs), follow these steps to set it up with most any BT source device.  Finally, in this demo, we show how this setup works on an iPad Air tablet. But a like routine works for iPhones, iPods, and Android phones and tablets too.

Ultimate Ears Wonderboom 2 Setup Instructions: Step by Step

1. Unpack and Charge This Ultimate Ears

First, for detailed charging instructions, see our   Ultimate Ears Wonderboom 2 Charging Instructions   Ultimate Ears Wonderboom 2 Charging Instructions    post.

2. Next, Visit the Home Screen on your Bluetooth Device

Press the Home button to get to the  Home  page.  See our  Home  screen as shown next on our iPad.

3. Find the iPad  Settings App

We found ours on the second page of the  Home  screen on our tablet.

4. Bring up the Settings App

Then, tap the Settings app icon.

The iPad Air then shows the first page of its  Settings  screen, as shown in the next screenshot

5. Go to the  Bluetooth Settings Page to Continue with Ultimate Ears Wonderboom 2 Setup Instructions

Next, tap the  Bluetooth  item, as pointed at by the dark green arrow in the last screenshot above.

Our  Bluetooth Settings screen then appears as follows. Note that we switched ON our Bluetooth on this tablet. But since the 2 is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we’ve never paired it with this iPad before.  Plus, the 2 is not yet broadcasting its BT connection info. This looks something like as shown next.

Note in this picture that no Ultimate Ears Wonderboom 2 appears just yet.

6. Turn On your Ultimate Ears Wonderboom 2

Next, turn on the Ultimate Ears by rapidly pressing its  Power  button.

See this button, pointed at by yellow arrow, in the next picture.

The Ultimate Ears Wonderboom 2 then comes on, letting you know this by making a startup sound.

7. Put your Ultimate Ears Wonderboom 2 into Bluetooth Pairing Mode

Now, to see the 2 on your iPad Air, place it into BT pairing mode. For that, press and release the Bluetooth button, as circled in the next picture.

When you press this Pairing button, the unit makes an offbeat but cool pairing sound. Plus, a lamp in this button starts fast-flashing white. See this in the last picture above.

8. Find your Ultimate Ears Wonderboom 2 on your iPad Air

See the picture next. We found ours, as pointed at by the yellow arrow in the next picture.

9. Pair with your Ultimate Ears Wonderboom 2

Tap the listed Wonderboom in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Your iPad Air then pairs with the Wonderboom 2 (appears as “WONDERBOOM 2” in this demo).

The  Bluetooth Settings  screen then changes to display something like the following.

Note that the 2 now shows as paired, as pointed at by the yellow arrows in the last picture.

10. Done with Ultimate Ears Wonderboom 2 Setup Instructions !

Finally, we have now successfully setup the 2 on an iPad Air tablet.  Audio output from that iPad now plays on the 2, which is what you want. Bluetooth set up like this works with most other Bluetooth source devices as well.

Other Posts About the Ultimate Ears Wonderboom 2

1. 1. Charge Time
   2. How to Check the Battery
   3. Charging Instructions

References for Ultimate Ears Wonderboom 2 Setup Instructions.

1. 1. Official Product Page
   2. Where to Buy Ultimate Ears Wonderboom 2