Explains the Ultimate Ears Wonderboom pair two speakers routine, so that they both play the same audio content from one source device. In this demo, we use one Ultimate Ears Wonderboom 1, and one Ultimate Ears Wonderboom 2 to show how pairing two of these works. You can indeed mix and match.
We show the Power buttons on each of our Ultimate Ears Wonderbooms in the next pictures.
Press and release the Power button on the first one, and await the power-ON sound.
Then, press and release the Power button on the second Ultimate Ears Wonderboom, and again, wait for it to come on.
In this demo, we’ll first link the Ultimate Ears Wonderboom 1 speaker with our iPad Air tablet. Now perhaps you’re not sure how to pair your Ultimate Ears Wonderboom to a Bluetooth source device. If so, then see our How to Pair 1 Ultimate Ears Wonderboom Speaker post for details.
Next, press the middle (Play / Pause) area of the Ultimate Ears Wonderboom you just paired with your BT source device. Hold until the speaker makes a pairing sound and the Bluetooth lamp starts fast-flashing. Here, our first speaker is the original Ultimate Ears Wonderboom (the first version of this series). And in the following picture, we show where to press.
Next, press and release the middle area of the second Ultimate Ears Wonderboom. Here, ours is the second version (Wonderboom 2). And in the next picture, we show where to press.
The speaker then makes a ready-to-pair sound. Also the Bluetooth light just above the center button blinks briefly. Then, once this speaker pairs with the first Ultimate Ears Wonderboom, its Bluetooth lamp glows steadily.
Your two Ultimate Ears Wonderbooms now share a connection. Thus, when you play audio on your source device, you’ll now hear it through both Ultimate Ears Wonderbooms.
Note that each Ultimate Ears Wonderboom provides stereo sound. Furthermore this holds true even when you have two of them joined to each other. That is, each speaker provides stereo whether or not it connects to another. Thus it’s not the case that the first Ultimate Ears Wonderboom plays the left channel and the second plays the right. Both Ultimate Ears Wonderbooms play both channels, in stereo, in fact.
To break the connection between the two Ultimate Ears Wonderbooms, simply power down the second one. After that, the first one (the one that you paired with your Bluetooth device) continues playing.
Now powering down the first one will also break the link between it and the second speaker. Then the second one will stop playing. But this also breaks the link with the source BT device. So powering OFF the first speaker stops BOTH speakers. But the second one will still be ON until you turn it off.
We have nearly three decades experience playing and caring for digital video discs (DVDs). Indeed,…
Lists ways of Telling That JBL Charge 3 is Charging. Now this BT speaker with…
In this piece, we cover the Reboot Samsung Galaxy J7 procedure. You might do this…
Here, we offer JBL Xtreme 2 firmware update procedure for this revised version of the…
The Echo Dot 2 features several buttons and a light ring around its top, and…
Here are some fix ideas for when you find the Sony SRS XG300 Power Button…