Ultimate Ears Wonderboom Pair

Front view of the Wonderboom 1.

This post offers a general Ultimate Ears Wonderboom Pair routine. First off, start with your speaker powered OFF (all dark top panel LEDs). Then, follow these steps to pair it with most any Bluetooth source device. Now in this demo, we show how this pairing works on an iPad Air tablet. But a like routine works for iPhones, iPods, and Android phones and tablets too.

Ultimate Ears Wonderboom Pair: Step by Step

1. Visit the Home Screen on your Bluetooth Device

To begin, press the Home button to get to the Home page. See our Home screen as shown next on our iPad.

2. Find the iPad Settings App

We found ours on the second page of the Home screen on our tablet.

iPad Home Screen with Settings App Highlighted.

3. Bring up the Settings App

Then, tap the Settings app icon.

The iPad Air next displays the first page of its Settings screen, as shown in the next screenshot

iOS Settings screen on iPad Air, with Bluetooth turned ON screen showing, and the Bluetooth item highlighted.

4. Go to the Bluetooth Settings Page to Continue with this Ultimate Ears Wonderboom Pair Procedure

Then tap the Bluetooth item, as pointed at by the dark green arrow in the last screenshot above.

Our Bluetooth Settings screen then appears as follows. Note that we switched ON our Bluetooth on this tablet. But since the UE is currently OFF, it does not show in either the My Devices or Other Devices lists on the tablet yet, Why? Because we’ve never paired it with this iPad before. Plus, the speaker is not yet broadcasting its BT connection info. So this situation looks something like as shown next.

iPad Air tablet showing previously paired Bluetooth devices list.

Note in this picture that no Ultimate Ears Wonderboom appears just yet.

5. Turn ON your Ultimate Ears Wonderboom

Then, turn on the UE by rapidly pressing its Power button.

See this button, circled in green, in the next picture.

The Ultimate Ears Wonderboom top view. Showing the dark -Power- button.

The Ultimate Ears Wonderboom then boots.

The Ultimate Ears Wonderboom powered ON. Showing the top view, with the glowing -Power- button. The unit must be running first, before you can pair it.

6. Put your Ultimate Ears Wonderboom into Discovery Mode

Now, to see your speaker on your iPad Air, place it into BT pairing mode. For that, press and release the Bluetooth button, as circled in the next picture.

The -Pairing- button.

When you press this button, the speaker makes an offbeat but cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture above.

7. Find the Ultimate Ears Wonderboom on Your Source Device

See the picture next. We found ours, as circled in green.

iOS Bluetooth Settings page. Showing the Ultimate Ears Wonderboom as discovered but no pairing has happened yet.

8. Pair with the Ultimate Ears Wonderboom

Then tap the listed speaker in the Other Devices section of the Bluetooth Devices list, shown above.

Your iPad Air next pairs with the Ultimate Ears Wonderboom (appears as “WONDERBOOM” in this demo).

Furthermore, the Bluetooth Settings screen then changes to display something like the following.

Showing the Ultimate Ears Wonderboom as paired.

Note that the speaker now shows as paired, as circled inside the green oval in the last picture.

9. Done with this Ultimate Ears Wonderboom Pair Routine !

Finally, we have now successfully paired our UE with our iPad Air iOS device. Audio output from that iPad now plays on this wireless UE speaker, which is what you want. Pairing like this works with most other Bluetooth source devices as well.