The Wonderboom 3 charging light is a single LED on its top panel, close to the front and when it is blinking fast, take heed. This lamp lets you know battery status, whether it’s draining or charging, or whether it’s low or not when discharging. However, it does not show charging progress. Nor does it indicate how full the battery is at a given time while charging. And it does not show much energy remains when discharging. But it does change color when the battery reaches almost-dead state. So in this post, we describe how to read this light.
This happens when the Wonderboom 3 is running but the battery is critically low. It signals that the 3 will power down soon if you don’t connect it to a charger.
The status light flashes in a gradually dimming and brightening pattern white as the speaker charges. On this speaker, this LED is the only visual indication that charging is happening. But it does not tell how far along the charging is.
This slowly fading and brightening white pattern displays while charging, whether the speaker is OFF or ON.
As speaker charging continues, the light keeps slowly blinking white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white. It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.
The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.
In this post, we give the Erase iPod Nano 3 procedure, that shows how to…
In this post, we show how to erase iPod Nano 3, and restore it to…
We’ve owned the 16 GB iPod Nano 6th generation player from Apple for many years…
We owned the Sony MDR-7506 headphones for almost two decades. Thus we’ve played them on…
We give here the procedure to Clean Washer with Affresh, based on the information on…
We offer these Affresh Washer Cleaner Instructions, based on the instructions found on the box. …