Wonderboom 3 Flashing White Light

Two light LEDs may be flashing white on the Wonderboom 3. There’s the Bluetooth pairing lamp. Also there’s the charging lamp, in the Power button. These are both on the top of the unit. The pairing lamp flashes when pairing mode is active, and the charge lamp flashes when the Wonderboom 3 is charging. Details on both of these flashing white lights follow.

Wonderboom 3 Flashing White Light: Pairing Mode Active

When the Pairing button flashes white, the Wonderboom 3 is in discovery or pairing mode.

Wonderboom 3 Flashing White Light: During Charging

The Power lamp flashes white while the Wonderboom 3 is recharging.

This light flashes in a gradually dimming and brightening pattern. On this speaker, this LED is the only visual indication that charging is happening.  But it does not tell how far along the charging is.

It flashes during charging whether the 3 is OFF or ON.

As charging continues, the light keeps slowly flashing white. Furthermore, battery recharging is over when the lamp goes out, or turns solid white.  It turns OFF when the speaker is OFF, and switches to a solid white glow when the speaker is ON.

The battery recharge cycle finishes when the speaker status lamp turns OFF. Even with the AC charger running, the lamp does not glow when battery is full. Not unless the speaker itself is running.

Other Wonderboom 3 Posts

1. 1. How to Check Battery Level on Wonderboom 3
   2. Wonderboom 3 Pairing Procedure
   3. How to Reset Wonderboom 3
   4. How to Connect Wonderboom 3 to Alexa

References

1. 1. Official Wonderboom 3 Support Page
   2. Where to Buy the Wonderboom 3