The Alexa Echo Dot talking speakers need a factory reset every now and then. This restores them to out-of-box, factory default parameters. Factory resetting Alexa smart speakers like the Echo Dot models, also fixes many bizarre behaviors they sometimes act out. So here thus, we give Factory Reset Alexa Echo Dot Instructions. We think they’ll be useful because with new versions of these speakers coming out annually, people will likely sell their older models in large numbers. So they’ll want to know how to completely wipe any personal data out of the Echo Dots before they get rid of them. Factory resetting does just that. It prepares the speakers for resale to another person. We cover all three current models of the Alexa Echo Dot speakers in this piece.
Here, we give the reset procedures for all three models of the Echo Dot, with the latest model (the Echo Dot 3rd generation speaker) listed first, then the older generation 2 model, and finally, the oldest generation 1 Echo Dot.
First, connect the Dot 3rd Generation speaker to its 12-volt power adapter cord, as shown next.
See this as shown next.
Then, wait for the AlexaEcho Dot to finish booting. It’s done when either the light ring goes all the way dark, or it flashes orange, red, or purple.
Depress the Action button until the light ring turns orange, and the smart speaker announces that it is entering setup mode. On this Alexa speaker, the Action button doubles as the Reset button, and is pointed at by the green arrow in the next picture.
Your Alexa Echo Dot 3rd Generation speaker is now restored to its factory default settings, and has entered setup mode, as shown next.
Power up the unit before resetting.
Connect the Amazon Echo Dot 2 to its USB power adapter. The light ring glows blue for a time, and then goes dark. This means good boot up.
See our Where is the Amazon Echo Dot Reset Button post, for details on how to find the reset button on the 1st and 2nd gen Echo Dot devices. At any rate, once the light ring goes black, press and hold the Mic Mute and Volume Down buttons. Press these at the same time for the same amount of time.
After a several-seconds pause, the light ring again goes black for a brief pause, and then glows orange.
You have now factory reset your Amazon Echo Dot 2 speaker and restored its factory default settings. It has now entered setup mode.
Connect the 1st Gen Amazon Echo Dot to its USB power supply. The light ring will light up blue for a bit, and then go off once the Dot completes booting.
Once the light ring goes black, use a paper clip end to press in and hold the Reset button. Keep pressing for five to ten seconds. Then, let it go when the light ring turns orange, and then blue.
After a several-seconds pause, the light ring goes black for a brief few seconds, and then turns orange.
You have now restored your Alexa Echo Dot 1st Gen speaker to its factory default state. The speaker enters setup mode after a factory reset.
You may now give your Alexa Echo Dot to a loved one or buyer. Don’t fret that they’ll learn your speaker settings in your Alexa Amazon account. Factory reset erases those data from your Amazon Echo Dot. You might decide to set it up once again on your existing account.
Once the light ring turns orange, the unit remains in setup mode until someone runs a fresh setup procedure. The Alexa Echo Dot won’t function until set up and linked to an Amazon account again.
A complete factory reset Alexa Echo routine is necessary at times. Why? Because maybe…
A complete factory reset Alexa Echo routine is necessary at times. Why? Because maybe…
The Amazon Dot assistant speakers need a factory reset every now and again. This restores…
The Amazon Echo Dot assistant speakers need a factory reset every now and again. This…
The Echo Dot assistant speakers need a factory reset every now and again. This restores…
This post shows the Amazon Alexa Bluetooth Pairing routine. We illustrate this with a JBL…