Here, we offer our Amazon Echo Chromecast Factory Reset Instructions. Factory resetting restores this unit to factory default state. Often, a reset fixes any strange errors you might see on the Audio Chromecast. Plus, it also erases any WiFi network info stored on the unit. Thus, a reset ensures that the Chromecast will not connect to your Google account when the next person to own it after sale plugs it in.
First, the factory reset button is on the side of the Chromecast receiver, near the micro USB power port at the top of the unit. We point this out with the blue arrow, shown in the following picture.
Then, we suggest that you unplug Chromecast Audio from any amps or speakers before factory resetting. Why? Because during reset, this unit may make some loud pops and clicks. Plus, these abrupt and loud noises could blow speakers and amps, set to higher volume levels.
Note too, that a reset severs the Chromecast Audio from the WiFi network it was signed into before. It also unlinks it from your account. So, factory resetting is always a good idea when you’re getting the unit ready for resale or gifting.
So, with the Chromecast powered up, press and hold the Factory Reset button here with a thumb or index finger for three to six seconds. This starts the factory reset, when the pilot lamp near it turns orange.
Finally, the reset is done when the light flashes an orange, gradually fading light pattern.
Again, you’ll need to set up your streamer again, as it will not work until you do.
Electric Baseboard Heaters Installation is a fun task and we offer help based on our…
This is our list of Baseboard Heater Installation Tips. Now installing these can be a…
We bought the Pelonis Electric Heater HO-0250H to warm the living room in our ground…
We purchased the Pelonis Whole Room Radiator Heater to warm the bedroom in our ground…
We review the Pelonis Electric Radiator Heater 7 Fin Oil Filled HO-0260 here, which we…
We purchased the Pelonis Whole Room Radiator to warm the bedroom in our ground level…