Google Home Mini speaker, top view, showing its lights glowing blue.
Here we show factory resetting of the Google Home Mini assistant speaker. You might do this to prepare the unit for sale to another person. Or, you want to link it to a new Google account. Or you wish to connect it to a new WiFi network. But whatever the reason, this post will teach you how to factory reset it.
Note that if you want to fix erratic speaker behavior, you may not have to run a complete restore. So, before factory resetting, try powering down the speaker for fifteen seconds. Do this by unplugging its AC cable. Then, wait fifteen seconds. Finally, power it up again. This usually restores proper operation.
But if simple power cycling does not fix the problem, then read on. Or if you wish not to fix a problem but to give the unit away, then again, read on.
Keep in mind that once factory resetting is complete, you cannot work the Mini from the Google account where you did before. Therefore to control the speaker again, run through the setup routine. In that procedure, relink the speaker to that account once more, via the Google Home app. Or, link it to another Google account. Either way, the choice is yours.
After boot completes, go on to step 2.
Find this button in the orange area on the underside of the Mini, near the power cord USB plug.
One light on the top then lights up yellow, as we see next. Then, the Google Home Mini warns you that you’re about to factory reset the device. The it tells you that if you wish to abort the reset, then release the button now. But keep holding the button in to perform the reset to factory default state.
The first yellow light then comes on. Next, one more turns on every few seconds until the entire row of four lights up. Factory resetting begins shortly thereafter, as long as you keep the reset button firmly depressed.
Do not power off the unit during this operation. Why? Because doing so could render it unusable (bricked).
Let go of the button when the unit emits a short chime chord sound and the yellow lights go dark.
Reset begins once the lights go out and the unit stays dark for several seconds, as shown next.
After a pause, the white lights come back on. They show a scanning marquee pattern for three or five seconds, as shown next.
After some seconds, the speaker again goes dark as the resetting completes. Then, the reboot starts, as we show next.
After several to ten seconds, the lights come back on, colored dim gray. They show a sort of scanning pattern, as shown next. This means that a reboot after factory resetting is in progress.
Several seconds into the reboot, the lights turn multi-colored as shown next.
Then, you hear the startup complete music and then the speaker speaks, “Welcome to Google Home. To get started, download the Google Home app on a phone or tablet.”
This means that the unit is now ready to accept setup commands from the Google Home App. The speaker shows this by displaying the four white blips across its top. These lights show a dimming and then brightening pattern. See this in the next picture.
You may now give your Google Home Mini to another. You need not fear that they’ll access your settings or other personal info. Or, set it up again on your existing account, perhaps with a different Wi-Fi network or device name.
The light row then turns white with the four dots glowing. Then, the unit stays in setup mode until you run the setup procedure. Please note that the speaker will not function until fully set up and linked to a Google account.
Describes how to check battery level on the JBL Go 3. Now the status lamp…
To check battery on the JBL Go 3 speaker, the status lamp tells about the…
Describes how to check battery life on the JBL Go 3. Now the status lamp…
Describes how to check battery percentage on the JBL Go 3. Now the status lamp…
Describes how to check battery life on JBL Clip 4 by reading the power status…
Describes how to check battery percentage on JBL Clip 4 by reading the power status…