You can change how loud the bass is on the JBL Boombox 1 BT speaker, by turning on and off its bass boost mode. When switched on, this mode makes the passive bass radiators on the left and right edges of the speaker vibrate much more. Plus, this adds a low rumble quality to the playing program, that travels pretty far from the speaker. So, for you boom lovers, this post shows how to bass boost this speaker, to get that extra kick.
By default, the Boombox 1 has bass boost mode turned ON after a hard reset. This adds a bit of treble and lots of extra bass to the audio output as compared to when this mode is OFF.
You can turn this extra bass mode off by pressing and holding in the Volume Down (-) and Bluetooth buttons as circled in green in the last picture above.
Hold for about ten seconds, until the Power and Connect Plus buttons both light briefly. See these lamps pointed out in the next picture.
To activate bass boost once again, press and hold the Volume Down and Bluetooth buttons in until the Power and Connect Plus buttons light white. Then release the buttons. When the buttons inside the oval above both light for a second or two and then go off, bass boost has resumed once again.
The drivers really thump when you switch ON bass boost. So take care in how loudly you play this speaker with the bass boosted, to avoid damage to the speaker drivers. If the bass is crackling, tapping, or otherwise distorting, turn it down !
Here, we list JBL Flip 4 speaker specs specifications. To summarize, these cover the speaker's…
This post shows how to connect Google Home Mini to Bluetooth speakers. Here, we show…
Gives the JBL Flip 4 firmware update procedure. This routine can take up to thirty…
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…