How to Charge JBL Flip 2

Here, we cover how to charge JBL Flip 2 portable Bluetooth speakers.  Indeed, you can charge JBL Flip 2 wireless speakers easily through their exposed USB charge ports. To summarize: First, select an adequate USB power adapter. Why this? Because the Flip 2 does not come with this standard.

Plus, the Flip 2 needs a medium power USB power source to charge fully in the least amount time. Next, connect a micro USB cable between the Flip 2 and that adapter. Then, plug the adapter into a working wall outlet. Finally after a few to four hours, your JBL speaker will fully recharge. Then, you’ll be able to play it again for up to four hours at middle volume.

How to Charge JBL Flip 2 Portable Bluetooth Speakers

1. Choose Right Size Power Adapter

Firstly in this JBL Flip 2 charging demo, we use the RavPower 24 watt dual port USB charger adapter.

2. Find the USB Charge Port on the JBL Flip 2

Find the micro USB charging port on the port side of the speaker.  Unlike the later models of the Flip, the charge port here is out in the open.  Not hidden behind any waterproofing hatch.

3. Plug in the Micro USB Cord to the Flip 2 to Continue with How to Charge JBL Flip 2

Then, plug the small end of your micro USB charge cord into the matching micro USB port in the speaker.

4. Plug the Other End of the USB Cord into your USB Power Adapter

Next, connect the A end of the USB charge cable to the power adapter, as shown next.

5. Plug the AC USB Power Adapter into a Working Wall Outlet

Then, now that we have connected the Flip 2 and our RavPower adapter. So then we plug the RavPower into a working AC outlet. In this demo, we connect ours to a surge protector power strip. Plus, we ran our speaker completely dead before this demo.

At least one of the battery status lamps lights up and blinks when you apply eUSB power.

Further, there are five lamps that light in succession as the speaker battery charging progresses.

6. Let the Flip 2 Charge Until the Gauge Goes Out to Continue with How to Charge JBL Flip 2

Charging is complete when all of the battery status lights glow solid. None flashing.

7. Unplug the USB Charge Cable

Then as soon as practical, disconnect the charge cable from the speaker after charging completes.  We suggest against leaving the speaker connected to AC power, to preserve battery recharging ability.

8. Done with How to Charge JBL Flip 2 !

So we have now fully charged our JBL Flip 2. Note that the battery charge status gauge just after turning on the unit after a full recharge. All lamps are aglow as shown in the step 6 pictures above. This means that the battery now has a full charge.

9. Repeat Battery Recharging as Needed

Finally, repeat this charging process every three to five hours of play. This keeps the battery in top condition. We charge ours when the gauge lights show only one light glowing, as shown next.

Other Posts About the JBL Flip 2 Speaker

1. 1. Battery Life, How Long the Battery Should Last
   2. JBL Flip 2 Review and Features
   3. How to Tell if This Speaker is Charging
   4. Reset Button Location

References for How to Charge JBL Flip 2

1. 1. JBL Flip 2 Official Product Page
   2. Where to Buy the JBL Flip 2