How to Hard Reset Sony XB41

Sony SRS XB41 -Power- and -Volume DOWN- buttons.

Show you how to hard reset your Sony XB41 Extra Bass speaker to its default settings. Resetting restores the XB41 to default state. Plus, hard resetting erases any earlier paired Bluetooth devices from its memory. Clearing these stops this speaker from pairing to any nearby Bluetooth devices. Also, you might hard reset to get it ready for sale or re-gifting, or to stop it from pairing wirelessly with devices you no longer wish it to connect with.

How to Hard Reset Sony XB41, Step by Step

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

The Sony XB41 -Power- button.

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.

Sony XB41 -Power- Light Glowing White

The speaker may make a ding-dong tone sound when it powers up, to announce that it has paired, should it connect to a nearby device. Or it may make no sound at all if it does not. Whether the unit pairs or not though, this hard reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons Together

Find these buttons as shown next. They are both on the top button panel, as we point out in the next picture.

Sony XB41 -Power- and -Volume DOWN- buttons.

The XB41 then enters the hard reset process.

Then after around five seconds, the speaker powers OFF, and the status lamp goes dark, as shown next. So release the buttons at this point. Note that on the SRS XB41, there is no power-down sound.

The speaker with dark -Power- lamp.

3. Check that your Sony XB41 Did Indeed Hard Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after hard reset, the XB41 comes up in discovery mode. The Pairing Mode lamp quickly flashes blue to let you know this. E.g. See this in the next picture.

The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Hard Reset Sony XB41 !

The hard reset is now finished. So you may now sell or gift the speaker, or pair it again with your favorite Bluetooth devices.

After a hard reset, the XB41 no longer automatically links with any Bluetooth device. So to restore auto joining, you manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and are in range, pairing would automatically take place once more.