Categories: Thermostats

How to Reset WiFi on Honeywell Thermostat

This post gives reset WiFi instructions for a typical Honeywell thermostat. For most thermostats, the best way to reset the WiFi  is to just do a factory default reset. So that’s what we’ do here.  We demonstrate this on the RTH9580WF wireless Honeywell thermostat. This method does the following.

    • First of all, it clears out all custom settings.
    • Then, it resets the WiFi network.
    • Finally, it restores the WiFi thermostat back to factory default state.

So, follow the steps below, to hard reset most any Honeywell WiFi thermostat.

We suggest these directions when fixing problems. Resetting the WiFi in this way also cuts the chance that faulty settings are causing the t-stat to act funny.

But after doing this, the t-stat forgets any programmed settings. So you must re enter your WiFi network name and password again. Also, your custom schedules, if any, will disappear as well. Resetting returns the Honeywell WiFi thermostat to the built-in heating and cooling routines. So again, you might want to adjust them again for to your specific needs.

Displaying the -Home- screen.

How to Reset WiFi on Honeywell Thermostat: Before You Start

Get your Manual

Before restoring to factory default settings, gather your t-stat manual that shipped with it. Or, find it online at Honeywell’s web site.

Write Down the Current Thermostat Program Schedule

Jot the current daily program schedule currently stored in the t-stat. Do this if you’ve changed it from the default schedule.

Record any other Settings you’ve Changed from Default

Then, run down through the menus in the t-stat. Jot any settings that you changed prior that let the Honeywell WiFi thermostat work with your furnace. These include filter-change reminders, WiFi network connection info, system type, t-stat name, location, et al.

How to Reset WiFi on Honeywell Thermostat: Step by Step

1. First, Tap the  Menu Button on the Touchscreen

Find this button in the picture above, at the top right corner of the screen.

Then, scroll down by pressing the down arrow key, until you see the Preferences button, as shown next.

The Honeywell thermostat displaying the -Menu- screen. Showing the -Preferences- button.

2. Then, Tap the Preferences Button

When the Preferences screen appears, scroll with the down-arrow key.  Look for the  Restore Factory Defaults button.  We circled this in red in the next picture.

The -Preferences- menu. Showing the -Restore Factory Defaults- button.

3. Then, Tap the Restore Factory Defaults Button to Continue with How to Reset WiFi on Honeywell Thermostat

The thermostat then prompts you to confirm that you surely want to restore the thermostat, as shown next.

4. Then Confirm that you Want to Reset the WiFi on the Thermostat

WARNING: Tapping the green Yes button next, erases all user specific settings. So do not reset until you feel that you can set it up again after. Get help from a climate control specialist if you’re unsure.

The -Restore Factory Defaults- confirmation screen.

If you wish to proceed, then tap the green Yes button.  Otherwise, tap the red No button.

When you press Yes, the display then shows the Restoring Factory Default Settings screen for a bit, as shown next.

The -Restoring Factory Default Settings- screen during reset of WiFi.
After some seconds, the screen goes dark. The Honeywell thermostat reboots next.  Then, the boot screen, showing the logo shows next, as shown below.
The -Boot- screen after reset WiFi completes.

Then, after boot-up, the t-stat prepares to get new data from you.  While it does this, it shows the Please Wait screen as follows.

The -Please Wait- screen after booting.

5. Enter New Startup Data at the Prompts to Continue with How to Reset WiFi on Honeywell Thermostat

Then, the Honeywell WiFi thermostat prompts you to enter some initial settings. Finally, this allows it to start up with working default values, as shown next.

The -Connect WiFi Network- prompt after reset of WiFi finishes.

After WiFi reset, follow the prompts. They ask for info about your WiFi network and HVAC system.

6. Done with How to Reset WiFi on Honeywell Thermostat !

At last, you have now restored your Honeywell WiFi thermostat to factory default settings.

Other Posts About the Honeywell Thermostat

    1. How to Clear Schedule on Honeywell Thermostat
    2. How to Change Honeywell Thermostat Temperature Setting
    3. Unregister Honeywell Thermostat RTH9580WF Instructions
    4. How to Reconnect Honeywell Thermostat to WiFi
    5. How to Fix Honeywell Thermostat Not Following Schedule

References for How to Reset WiFi on Honeywell Thermostat

    1. Honeywell Thermostat Official Product Page
    2. Where to Buy a Honeywell Thermostat
admin

Recent Posts

How to Update JBL Charge 3 Speaker Firmware

Here, we show how to update JBL Charge 3 speaker firmware for this popular Bluetooth…

9 hours ago

Waterpik NSP 853

We received the Waterpik NSP-853 Power Spray Plus massaging shower head for Christmas some years…

11 hours ago

How to Turn On Bluetooth in Google Home Speaker

All smart speakers in the Google Home family now support Bluetooth.  They can act as…

12 hours ago

How to Set Sleep Timer on Google Home Speaker

Firstly, the original Google Home speaker has a sleep timer that you can set and…

13 hours ago

JBL Flip 4 Speaker Charging Instructions

Follow these JBL Flip 4 speaker charging instructions for longest play using the hidden USB…

14 hours ago

JBL Flip 4 Speaker Specs Specifications

Here, we list JBL Flip 4 speaker specs specifications.  To summarize, these cover the speaker's…

20 hours ago