JBL Charge 1 Power Button Not Working Fix

When the Power button on your JBL Charge 1 speaker is not working, this likely means one or more things as follows.

1. 1. Dead Battery. The internal battery is empty needs a recharge for continued speaker operation. Use a commercially available USB charger to do this.
   2. Faulty AC Adapter. The power adapter charger is defective.  So replace it with a charger that delivers 5 volts, at 2.0 amps (10 watts).
   3. Faulty DC Input Port. The micro USB input port for charging the speaker may be cracked, corroded, or otherwise damaged. Indeed this is a common problem we see on this speaker. So replace this if you have the necessary skills.
   4. Expired Battery. That battery no longer recharges due to extreme age, repeatedly overcharging, very long storage without recharging, or heavy use. Replace the battery in this case with one that delivers 3.7 volts at 6 amp hours (22.2 watt-hours).
   5. Dirty Button Panel. The button panel has sand, dirt, or other debris preventing the Power button from making proper contact when you press it. For this, you can, if so skilled, clean the switches by disassembling the speaker, and blowing, brushing out, and polishing the contact area.
   6. The Button Panel Has Failed. The switch panel is defective, and the solution here is to replace it. These parts are often available on eBay.
   7. Faulty Speaker. Your speaker is broken beyond repair. If you determine this, then the best bet is just to get a new speaker.

Related Posts to JBL Charge 1 Power Button Not Working

1. 1. JBL Charge 3 Power Button Not Working Fix
   2. Boombox 2 JBL Power Button Not Working Fix
   3. JBL Clip 4 Power Button Not Working Fix
   4. Clip 3 JBL ON / OFF Button Not Working Fix
   5. JBL Clip 2 Power Button Not Working Fix

Other Posts About the JBL Charge 1

1. 1. How to Hard Reset JBL Charge 1
   2. How to Pair JBL Charge 1

References for JBL Charge 1 Power Button Not Working

1. 1. JBL Charge 1 Official Product Page
   2. Where to Buy the JBL Charge 1