JBL Charge 3 Pairing

JBL Charge 3 portable Bluetooth speaker, original box, side 1.

This post gives the JBL Charge 3 pairing procedure, showing how to do this on typical Bluetooth devices. E.g. These include the iPhone, iPod Touch, and the iPad line of Apple phones and tablets.

JBL Charge 3 Pairing, Step by Step

Start with your JBL Charge 3 OFF and the power button dark. Then run through this routine to pair it to your device. We use an iPad Air tablet in this example.

1. Find your Way to the Home Screen on your iOS Device

Firstly, press the Home button to uncover the mobile iOS device’s Home screen.

2. Find the Settings App

We find ours on the second page of the iOS home screen.

iPad Air -Home- Screen, showing the -Settings- app.

3. Bring up the Settings App to Continue with JBL Charge 3 Pairing

Thirdly, tap the Settings app icon.

The device then displays the first page of its settings.

4. Go to Bluetooth Settings

Our Bluetooth settings screen displays as follows. Note that our Bluetooth is ON here. But since JBL Charge 3 is currently OFF, it does not show up in the devices list. Also, we don’t see it since we’ve never paired our JBL Charge 3 with the iPad Air before.

The previously paired Bluetooth devices list. Note that there’s no JBL Charge 3 now.

5. Turn On your JBL Charge 3

Turn on the speaker by quickly pressing its Power button.

The JBL Charge 3 powered off. Showing the dark -Power- button.

The speaker then powers up.

But since our iPad does not know about this speaker, the JBL Charge 3 will not pair with it automatically. The light that comes on in the power switch denotes this not-paired state. It does so by glowing solid white.

The glowing white -Power- button.

6. Put your Speaker into Discovery Mode to Continue with These JBL Charge 3 Pairing

Now, to see your JBL Charge 3 on your iOS device, place it into Bluetooth discovery mode. To do that, press and release the Bluetooth button, as we show in the next picture.

The -Bluetooth- discovery mode button.

When you press this button, the JBL Charge 3 makes a repeating single pluck guitar note sound several times. Also, the Power button changes from a solid white glow to flashing blue. See this next.

The -Power- button flashing blue.

7. Find your JBL Charge 3 on your iOS iPad, iPod, or iPhone Device

See the screen shot next. We find our speaker there.

An iPad Air -Bluetooth Settings- screen, showing JBL Charge 3 as discovered but not yet paired.

8. Pair with your JBL Charge 3

Tap the listed speaker in the Other Devices section of the Bluetooth devices list.

Your device then pairs with the Charge 3 (“JBL Charge 3” in this demo). The iOS device’s Bluetooth Settings screen then changes to look something like the following.

Showing the JBL Charge 3 paired with our iPad Air tablet.

Note that the JBL Charge 3 now shows as connected.

9. Done with JBL Charge 3 Pairing !

And finally, we have now successfully paired our JBL Charge 3 with our iPad iOS device. This routine also works when pairing with Apple iPhone and iPod devices. But in those cases, the screen faces may differ slightly on the iPhone.