JBL Clip 4 Charging Indicator

Describes how to read the JBL Clip 4 Charging Indicator lamp.

How to Read the JBL Clip 4 Charging Indicator

This speaker has a single LED on its top panel, under the carabiner clip. This displays battery status, whether it’s draining or charging, or whether it’s critically low or not when discharging.  However, it does not tell you the charging progress in terms of percentages.  Nor does it say how full the battery is or how much “juice” the battery has left. But it does change color when the battery nears deadness.

1. The Charging Indicator Lamp is OFF

When you power down the Clip 4 with no charger supplying current to the speaker, this lamp goes dark.  The lamp is also OFF when the charger IS working but the battery is full.

2. JBL Clip 4 Charging Indicator Shows Battery Recharging Progress

The indicator lamp lights up red (no flashing) while the speaker charges, as shown in the next picture.   On this speaker, the glowing light is the only visual indication that charging is going on.  But as noted earlier, it does not display how far along the charging is.

Note also that this lamp blinks red when the battery is low. So, you should recharge it next time you can.  It only flashes red when the battery is nearly dead, with no charger present. But when you connect a charger, this red flashing turns to a steady red glow.  Thus, this light never flashes red while the speaker charges.

3. When the Light Goes Out While Charging, Then Charging is Complete

As speaker charging continues, the light keeps glowing red. Then charging is complete when the lamp goes out, or turns white.  It turn off when the speaker is not ON, and turns white when it is ON.

The battery recharge cycle finishes when the speaker status lamp turns off.  Even with the AC charger, the lamp does not glow when battery is full, unless the speaker itself is running.  And in that case, it would glow or flash white.

4. The JBL Clip 4 Charging Indicator Is Not Much of a Battery Charge Remaining Meter

When unplugged from the charger, what was the charging indicator becomes the battery charge left indicator.  Well sort of.  If it glows white, then the battery has some amount of play time left, although you cannot tell how much.

The next picture shows a JBL Clip 4, powered ON, with the battery status lamp glowing solid white.  Note though that this light blinks white when the speaker has no pairing.

This light gives very few battery status patterns when not charging. In fact, then only one is when the battery is nearly dead.  Then, it starts flashing red.

JBL Clip 4 Charging Indicator in the Portable App

Unfortunately, the Portable app does not communicate with this speaker.  So you won’t be able to read its Charging Indicator there.

Other Posts About the JBL Clip 4

1. 1. JBL Clip 4 Extra Bass Mode
   2. How to Charge JBL Clip 4
   3. How to Make JBL Clip 4 Discoverable
   4. Battery Charge Time
   5. Hard Reset Routine

References

1. 1. JBL Clip 4 Official Product Page
   2. Where to Buy the JBL Clip 4