When you scan for in-range Bluetooth speakers, your JBL Flip 3 shows up as “JBL Flip 3” by default. But you can change this name using the JBL Connect app along with an iOS or Android based mobile device. In the post, we outline the JBL Flip 3 Change Name Instructions, step by step.
First, install the JBL Connect app on your Android or iOS mobile device. Then, turn on your Flip 3 and pair your mobile device with it. Then, once you do all that, follow the routine below to change the Bluetooth name.
Our copy installed on home screen four, as shown next.
Tap the JBL Connect app icon, as shown in the last picture.
Then, after the app discovers the Flip, you should see the following screen.
Tap the current name of the Name area.
You should then see the Rename screen for the paired Flip 3.
Tap the edit field just above the virtual keyboard, as highlighted by the dark blue arrow in the last screenshot. This puts the text cursor into that edit field.
Then, erase the current name for the Flip by tapping the backspace key on the virtual keyboard.
Next, type in the new name you wish for the JBL Flip 3. As shown next, we changed the name to “Tom’s Flip 3”.
Once you’ve edited the name what you want it to be, tap the blue OK button just beneath the edit box.
You then receive instructions on how to pair your Flip 3 again with its new name on the Rename Successful screen, as shown in the next screenshot.
This takes you back to the JBL Flip 3 Home screen in the Connect app. But note now, that the Flip appears with its new name assigned.
With your JBL Flip 3 still paired under its old name, run through this routine to unpair the Flip 3. forget it in your mobile device, and finally, re pair it under its new name.
Press and release the Power button to turn off the unit.
This unpairs it from your mobile device, and all lights go dark.
Press the Home button to close the JBL Connect app, and reveal the mobile device’s Home screen.
We found ours on the second page of the iOS home screen on our iPad Air, as shown next.
Tap the Settings app icon.
The mobile device then displays the first page of its settings, as shown next.
Our Bluetooth settings screen displays as follows on our iPad Air tablet. Note that our Bluetooth is enabled here. But since we turned off our Flip 3, it shows as not connected. See this as shown in this list of previously paired Bluetooth devices, shown next.
The JBL Flip 3 entry is the last item on the list shown in the last screenshot.
Then, the JBL Flip 3 device screen shows, as seen next.
When you tap the Forget This Device link, you then get the Forget “JBL Flip 3” prompt, as shown next.
Tapping OK removes the JBL Flip 3 data from the mobile device. This stops that device from looking for the Flip with that name, the next time you turn its Bluetooth on.
At any rate, after you hit OK, the Forget JBL Flip 3 window closes, and the system takes you back to the previously paired Bluetooth devices list, as shown next.
Turn on the JBL Flip 3 by quickly pressing its Power button. See this pointed at by the green arrow in the next picture.
The Flip then powers up.
But since it now has a new Bluetooth name that presumably no other nearby Bluetooth devices know about, it will not pair with anything. The light that comes on in the power switch denotes this not-paired state by glowing solid white, as shown next.
Now, to see your newly named Flip on your mobile device, place it into Bluetooth discovery mode. Do this by pressing and releasing the Bluetooth button, as shown in the next picture, pointed at by the bright green arrow.
When you press the Bluetooth Discovery Mode button, the Flip makes a repeating single pluck guitar note sound several times. Also, the power button changes from a solid white glow to flashing blue. See this next.
See the screen shot next. We found our Flip 3. Note that it appears here with its new Bluetooth device name, as pointed at by the blue arrow.
Tap the listed Flip 3 in the Other Devices portion of the Bluetooth devices list.
Your mobile device then pairs with the JBL Flip 3 using its newly assigned name (“Tom’s Flip 3” in this demo). It’s Bluetooth Settings screen then changes to look something like the following.
We have now successfully renamed / changed the Bluetooth device name of our JBL Flip 3. We’ve also successfully paired it with a mobile device using this new name.
Note that you can restore the original default name by resetting the JBL Flip 3. Or, you can rename it back to the “JBL Flip 3” by changing the name back using the above described procedure.
If you're a Spotify streaming service subscription holder, you can now listen to your playlists…
Here, we cover Unlink Spotify From Google Home Speaker. You may wish unlink (remove, delete)…
You might reset Alexa Echo Spot and return the settings to their factory default values,…
In this post, we run through how to find the Echo Spot IP address setting,…
You might reset Echo Spot WiFi to fix faulty connection behavior, put it on a…
Here, we detail our Echo Spot firmware update procedure for the Amazon Alexa Echo Spot.…