About JBL Xtreme Charger Cord

Xtreme JBL speaker back view, showing the DC charging cord inserted.

The JBL Xtreme (Extreme) comes with an AC charger cord, discussed all about it here. Moreover, this charger fully recharges the speaker’s built in power bank in roughly four hours. Then, the Xtreme plays for up to fifteen hours at average volume levels before needing another charge. So here, we give the JBL Xtreme charger cord specs. We furthermore show how it’s used to charge this hefty yet portable Bluetooth speaker.

Firstly, the cord is black in color, as shown next. Plus, it has one barrel type DC power output plug. Finally, a detachable AC power cable connects the power converter box to a standard wall outlet.

Charger adapter and cord Included with the JBL Xtreme.

About JBL Xtreme Charger Cord: The Details

Model Number: NSA60ED-190300. Input: 100-240 volts, 50-60 Hertz, 1.5 Amps Max. Further, the output is 19 volts DC, 3 amps Max. Positive center on the DC output plug. Made in China. UL Listed E312159 A.V. Power Supply.

The specifications label.

Energy verified. Manufacturer: Shenzhen JingQuanHua Electronics Co. LTD. Other numbers found on the label: SU10551-15001. MSIP-REM-JQH-NSA60ED-195305. A/S 82-2-523-5504.

About the Attached Cables

This charger cord comes in two pieces. First, we have the DC cable that’s permanently attached to the power supply box. Next is an AC “cheater” style cord that plugs into the power converter box.

The AC Part of the Charger Cord

Next, we show the AC input plug on that box. This is indeed a pretty standard, non polarized AC cord. So that means that you can insert the cord here either way. Furthermore, the standard 110 volt AC plug on the other end of the cable is non polarized.

The JBL Xtreme charger cord. Showing the AC input port plug.

Plus, the end of the AC cord that plugs into the power supply is about five eights of an inch long and a quarter inch wide, as shown next.

The AC charger cord, appliance end plug, laying against a ruler.

Also, the standard 110 volt AC plug on the other end of the cord is non polarized.

Next, we move on to the other connector in this power adapter.

The DC Output Part of the Charger Cord

In addition, the part of the DC output jack the goes inside the speaker measures around 0.3 inches or 8 mm long, as shown next.

The DC output jack laying against a ruler.

This DC plug has a notch near the tip to enhance secure holding when connected to the speaker, as seen in the last picture. Moreover, this plug is about three sixteenths of an inch wide, or roughly 5 mm. But we claim no degree of precision on these measurements.

JBL Xtreme AC charger cord, showing the end of its DC output jack laying against a ruler.

About JBL Xtreme Charger Cord: Directions for Use

You connect the charger cord and speaker together via the DC cable and its barrel connector for recharging the internal batteries as shown next. The Xtreme has one DC input plug, labeled Power, inside its port panel just beneath the orange zipper. See this port pointed out by the green arrow in the next picture.

The ports zipper open, with the power input charging port on the speaker itself.

Finally, use this input to recharge the JBL Xtreme wireless speaker with this accessory charger cord.

Back view of the JBL Xtreme. Showing the DC charging cord inserted.

The speaker plugged in and charging from AC power.