Reset Chromecast Audio

Google Chromecast Audio receiver with its audio and power cords connected.

Here, we give the Reset Chromecast Audio procedure. Now resetting restores this streaming receiver to factory default state. Furthermore, this often fixes any strange behaviors you might see on this device.

Reset Chromecast Audio: Step by Step

First, find reset button is on the side of the Chromecast, near the micro USB power port at the top of the unit. We point this out with the blue arrow, shown in the following pictures.

The Chromecast Audio, front view, reset button highlighted.

We suggest that you disconnect Chromecast Audio from any amplifiers or amplified speakers before resetting. Why? Because during reset, the Chromecast may generate loud pops and clicks. Indeed, these could destroy (blow) connected speakers, especially with high volume settings.

Also, keep in mind that resetting signs out the Chromecast Audio from the WiFi network it was set up on before. It also unlinks it from your Google account. So, resetting is always a good idea whenever you’re getting the unit ready for resale or gifting.

The Chromecast side view, showing the reset button highlighted.

So with the unit powered up, press and hold the Reset button here with a thumb or index finger for several seconds. This then starts a factory default hard reset, when the pilot lamp near it turns orange.

Finally, the factory reset is complete when the light flashes an orange, slowly strengthening and dimming light pattern.

Rebooting in progress after reset, showing orange pilot lamp.

Again, you’ll need to set up your Chromecast Audio receiver again after this reset, for this device will not work until you do.