Reset HP Deskjet 3632

HP DeskJet printer 3632 in box, showing the Box front view.

Gives the reset HP Deskjet 3632 procedure. Resetting restores the printer to factory default settings. Then, you can input new printer settings from scratch. Or you can connect it to a different WiFi network. This may also correct printer driver problems on computers, fix faulty ink cartridge readings, and so on.

Thus here, we demo how to reset this popular printer copier scanner.

Reset HP DeskJet 3632: Step by Step

1. Turn Printer ON

Firstly, press and quickly release the Power button, located as shown by the pink arrow in the next photo.

Top view of the HP DeskJet 3632 printer, showing the -Power- button.

2. Wait for Printer to Power Up

You’ll know it’s complete when it stops making noise, and the Power button glows steady white .

3. Press and Hold in the Power Button

Don’t release it though, until you run through the next two steps.

4. Press and Release the Start Copy Black Button Twice

Fourthly, see the Start Copy Black button pointed at by the pink arrow in the next picture.

The -Start Black Copy- button.

5. Press and Release the Cancel (red x) Button Three Times

See location for it in the next picture.

The -Cancel- button.

6. Wait for the WiFi Status Light to Start Blinking

Find the light as we see in the next picture. Now when this light starts flashing, the printer then erases old data from its memory. After that, it’s ready for programming with new WiFi network credentials.

The -WiFi- network status lamp glowing.

7. Done with Reset HP DeskJet 3632 !

Finally, go ahead and set up the printer. Or sell it if you so desire. Now that it is back to fresh out of the box settings, the printer is ready for a new start.