Sony SRS XB43 Extra Bass speaker CHARGE light glowing.
In this post, we describe how to read the Sony SRS XB43 battery indicator lamp. We also discuss how to get battery charge percentage numbers as well.
First, this speaker has a battery level indicator LED on the top button panel. This displays battery status, sort of. E.g. Whether it’s draining or charging, or whether it’s critically low or not. But the battery indicator light neither reads out charging progress, nor battery fulness. However, it does flash when the battery reaches near-dead state. So this does indeed give you SOME indication of battery status. But just not a very precise reading.
However on this speaker, you can get a more precise reading by pressing the battery level button on the back. Then, the speaker speaks the actual battery percentage. We cover both ways to tell how much charge the battery has below.
The battery level / charging (CHARGE) lamp is dark in the following situations:
Each of these light states gives you some indication of battery charge status.
With the charger not present, the XB43 running, and the battery quite low, the CHARGE light starts flashing orange. This means that the speaker will soon shut off when it dies. So you should put it on the charge soon to keep the music playing.
The CHARGE lamp lights up orange (no flashing) as the XB43 charges, as we see in the next picture. On this speaker, this glowing light is the only visual means of knowing that recharging is going on. But it does not display how far along the charging is. To get this, use the battery percentage button in the button and port compartment on the back of the speaker.
Also note that this light should never flash while charging is in progress. If it does, then either your charger is not working well, or your USB cable is faulty. Or the speaker itself may be defective.
As speaker charging continues, the light keeps glowing. But eventually, recharging finishes. Then the battery indicator lamp goes dark to show this. It turns off when the speaker is not ON, and stays OFF when it is ON.
When unplugged from the charger, what was the charging indicator becomes the battery charge left indicator. Well again, sort of. If it is dark when the speaker is ON, then some play time remains. But you cannot tell exactly how much, just by reading the battery indicator LED.
You can have the speaker “speak” to you the approximate percentage of battery power left in the 43. Hear the female voice say this by pressing the BATT button in the back of the speaker. Now there are three buttons inside the ports compartment. In there, the button to press is the first one on the left.
When you press this LIGHT-BATT button, the speaker will say back one of the following.
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…
You can hard reset all of the smart speakers in the Google Home family. These…
Covers How to Hard Reset Google Home. Now you can reset this original version of…
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…