The front view from top down of the Sony SRS X5.
Gives you the Sony X 5 hard reset instructions to restore this speaker to its default settings. Furthermore, doing this erases any earlier paired Bluetooth devices from memory. We might want to clear these to prevent this speaker from pairing to any nearby Bluetooth devices. Also, you would best reset your speaker to get it ready for sale or re-gifting, or to stop it from pairing with devices you no longer wish it to connect with.
Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture. It’s in the back row of buttons on the top of the unit, closest to the rear right corner.
Then, the status light comes on, as shown next. This light we find just behind the Power button.
Note that they speaker makes no sound at this point, and whether or not it pairs with anything, the reset routine is the same.
Both of these buttons we find on the top of the speaker, right of center, as called out in the next picture. Both buttons are in the back row. The Volume Down button is in the leftmost position in this row, while the Power button is in the rightmost position.
Since one of these buttons is for power, you need to first touch and hold the Volume Down touch pad by itself, Then, after a half-second, while holding that one in, press and hold the Power button. Doing it this way prevents accidently powering down the speaker before it has a chance to hard reset.
Then, hold both buttons in until all lamps go out, and the speaker shuts down. This takes a second or two.
Next, the speaker powers OFF, and the Power and Pairing lamps go dark, as we see next. Note that on this model, there is no power-down sound when hard reset finishes.
You may release the buttons when all the lights go dark.
Next, power on the X 5 once more, as described in step 1 above.
Note that after a hard reset, this speaker comes up in pairing mode. The Pairing lamp blinks in fast white blips to tell you this. This is a signal for you to look for this speaker on a nearby BT device, and pair to it if you so desire.
The hard reset is now finished. So you may now sell or gift the unit, or pair it again with your favorite Bluetooth devices.
After a hard reset, the speaker no longer automatically connects with any previously paired Bluetooth device. Thus, to restore this auto syncing, you manually pair the X 5 with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing would automatically take place once more.
Here, we list JBL Flip 4 speaker specs specifications. To summarize, these cover the speaker's…
This post shows how to connect Google Home Mini to Bluetooth speakers. Here, we show…
Gives the JBL Flip 4 firmware update procedure. This routine can take up to thirty…
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…