UE Wonderboom 2 Pair With iPhone

This post gives the UE Wonderboom 2 Pair With iPhone and other iOS devices routine. This works with iPod Touch and iPad. Similar directions work with Android as well. So first, start with your speaker shut OFF (all dark LEDs). Then, follow along to pair iPhone with it.

UE Wonderboom 2 Pair With iPhone: Step by Step

1. Visit the Home Screen on your iPhone

Press the Home button to get to the  Home   iPad page.  See our  Home  screen as shown next.

2. Find the  Settings  App

We found ours on the second page of the  Home  screen.

3. Bring up the Settings App

Tap the Settings app icon.

The iPhone then displays the first page of its  Settings  screen, as shown in the next screenshot

4. Go to the Bluetooth Settings Page to Continue with UE Wonderboom 2 Pair With iPhone

Tap the  Bluetooth  item, as pointed at by the green arrow in the last screenshot above.

Our  Bluetooth Settings screen then appears as follows. Note that our Bluetooth is switched ON here. But since the speaker is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we have yet to connect it with this device for the first time.  Plus, the speaker is not yet transmitting its Bluetooth connection info. See this scenario, that appears as shown next.

Note in this picture that no UE Wonderboom 2 appears yet.

5. Power On your UE Wonderboom 2

Turn on the unit by quickly pressing its  Power  button. See this button, pointed out in the next picture.

The speaker then comes on.

6. Put your UE Wonderboom 2 into Pairing Mode

Now, to see the speaker on your iPhone, place it into BT discovery mode. For that, press and hold the Bluetooth button as circled in the next picture, until the rising plunks sound.

Indeed the speaker makes a distinctive noise twice. Plus, a lamp in this button starts quickly flashing white. See this in the last picture above.

7. Find your UE Wonderboom 2 on your iPhone

See the picture next. We found ours, as pointed out in green.

8. Pair with your Speaker

Tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Your iPhone then connects with the speaker (appears as “WONDERBOOM 2” in this demo).

The  Bluetooth Settings  screen then changes to display something like the following.

Note that the speaker now appears as connected, as pointed out in the last picture.

9. Done with UE Wonderboom 2 Pair With iPhone !

Lastly, we have now successfully connected this Bluetooth speaker with the test  iPhone.  Audio output from that source device now plays on the UE Wonderboom 2.

Other UE Wonderboom 2 Posts

1. 1. How to Turn OFF
   2. The Watt Figures
   3. How to Factory Reset
   4. General Connecting Directions
   5. How Do I Know When My UE Wonderboom Is Fully Charged

References for UE Wonderboom 2 Pair With iPhone

1. 1. Official UE Wonderboom 2 Support Page
   2. Where to Buy the UE Wonderboom 2