Bluetooth Speakers

UE Wonderboom Charging Light

Here we describe how to read the UE Wonderboom charging light.  Now this speaker has a single LED on its top panel, close to the front. This tells the battery status. It shows whether it’s draining or charging. Or it indicates when the battery critically low.  However, it does not tell you the charging progress. Nor does it show how much energy the battery has left when discharging.  But it does change color when the battery reaches almost-dead state. More details below.

UE Wonderboom Charging Light: How to Read It

1. The Lamp is OFF

When you power down the speaker with no charger, this lamp, that also doubles as a pilot light, is dark.  The lamp is also OFF when the charger IS feeding the speaker but the battery is full.

The UE Wonderboom top view. Showing the dark -Power- button.

2. Shows Battery Recharging Progress

The status lamp  slowly flashes white while the speaker charges, as shown in the next picture.   On this speaker, this LED light is the only visual indication that charging is running.  But it does not tell how far along the battery recharging is.

The glowing -Power- button.

Note that this lamp blinks red when the battery is critically low, as we show next. You should recharge pretty soon when you notice that.

When you apply power, this red flashing light turns to a slowly blinking white.  This blink pattern appears during charging, whether the speaker is OFF or ON.

The Charging Light lamp glowing steady red on the UE Wonderboom.

3. When the Light Goes Out, Then Charging Completes

As UE Wonderboom charging continues, the light keeps slowly blinking white.  But it finishes when the lamp goes out, or turns white.  It turn OFF when the speaker is not running, and turns white when it is ON.

The battery recharge cycle finishes when the speaker status lamp turns off. Even with the AC charger working, the lamp does not glow when battery is full. Unless that is, the speaker itself is running.

If the speaker is ON when charging finishes, the lamp turns from flashing white to solid white.

4. The UE Wonderboom Charging Light Does Not Tell Exact Charge Remaining

When you unplug from the charger, what was the Charging Light becomes the battery charge left indicator.  Well sort of.  If it glows white, then the battery has some amount of play time remaining. But you cannot tell how much.

But the only indication this light gives about the battery when not charging, is when the battery goes very low.  Then, it starts fast-flashing red, as we show above.

Other UE Wonderboom Posts

    1. How to Connect
    2. How to Factory Reset
    3. The RMS  Watts Numbers
    4. Explaining the Charging Indicator
    5. Adjust Volume Procedures

References for UE Wonderboom Charging Light

    1. Official UE Wonderboom Support Page
    2. Where to Buy the UE Wonderboom
admin

Recent Posts

How to Charge JBL Go 2 and Go 3 Speakers

This piece covers How to Charge JBL Go 2 and Go 3 Speakers. Do this…

30 mins ago

JBL Charge 3 Google Home Pairing

This post gives JBL Charge 3 Google Home Pairing Instructions. These include the original, mini,…

47 mins ago

Telling That JBL Go 2 Is Charging

Explains ways of Telling That JBL Go 2 Is Charging. Now this little speaker has…

2 hours ago

Connect JBL Go 2 to iPhone

This post gives the connect JBL Go 2 to iPhone procedure. Start with your speaker…

2 hours ago

Pair JBL Flip 4 With Google Home

This post demonstrates the pair JBL Flip 4 with Google Home procedure. This includes the…

2 hours ago

JBL Clip 2 Reset

Explains the JBL Clip 2 reset procedure, showing how to return this speaker to its…

2 hours ago