Wonderboom Pair

This post offers a general Wonderboom Pair routine. First off, start with your speaker powered OFF (all dark top panel LEDs). Then, follow these steps to pair it with most any Bluetooth source device.  Now in this demo, we show how this pairing works on an iPad Air tablet. But a like routine works for iPhones, iPods, and Android phones and tablets too.

Wonderboom Pair: Step by Step

1. Visit the Home Screen on your Bluetooth Device

To begin, press the Home button to get to the  Home  page.  See our  Home  screen as shown next on our iPad.

2. Find the iPad Settings App

We found ours on the second page of the  Home  screen on our tablet.

3. Bring up the Settings App

Then, tap the Settings app icon.

The iPad Air next displays the first page of its  Settings  screen, as shown in the next screenshot

4. Go to the Bluetooth Settings Page to Continue with this Wonderboom Pair Procedure

Then tap the  Bluetooth  item, as pointed at by the dark green arrow in the last screenshot above.

Our  Bluetooth Settings screen then appears as follows. Note that we switched ON our Bluetooth on this tablet. But since the Wonderboom is currently OFF, it does not show in either the  My Devices  or  Other Devices lists on the tablet yet,  Why?  Because we’ve never paired it with this iPad before.  Plus, the speaker is not yet broadcasting its BT connection info. So this situation looks something like as shown next.

Note in this picture that no Wonderboom appears just yet.

5. Turn On your Wonderboom

Then, turn on the speaker by rapidly pressing its  Power  button.

See this button, circled in green, in the next picture.

The Wonderboom then boots.

6. Put your Wonderboom into Discovery Mode

Now, to see your speaker on your iPad Air, place it into BT pairing mode. For that, press and release the Bluetooth button, as circled in the next picture.

When you press this button, the speaker makes an offbeat but cool pairing sound. Plus, a lamp in this button starts rapidly flashing white. See this in the last picture above.

7. Find your Wonderboom on Your Source Device

See the picture next. We found ours, as circled in green.

8. Pair with the Wonderboom

Then tap the listed speaker in the  Other Devices  section of the  Bluetooth Devices  list, shown above.

Your iPad Air next pairs with the Wonderboom (appears as “WONDERBOOM” in this demo).

Furthermore, the  Bluetooth Settings  screen then changes to display something like the following.

Note that the speaker now shows as paired, as circled inside the green oval in the last picture.

9. Done with this Wonderboom Pair Routine !

Finally, we have now successfully paired our Wonderboom Bluetooth speaker with our iPad Air iOS device.  Audio output from that iPad now plays on this wireless UE speaker, which is what you want. Pairing like this works with most other Bluetooth source devices as well.

Other Posts About the Wonderboom

1. 1. Wonderboom Reset Directions
   2. How to Charge Wonderboom
   3. Wonderboom Buttons Guide, How to Use
   4. Reset Wonderboom
   5. Wonderboom Charging Instructions

References for Wonderboom Pair

1. 1. Wonderboom Official Support Page
   2. Where to Buy the Wonderboom