Chromecast Audio Factory Reset

Google Chromecast Audio receiver package, showing inner box top open.

Here, we offer our Chromecast Audio Factory Reset procedure. Doing this restores this unit to factory default state. Often, a reset fixes any strange errors you might see on the Audio Chromecast from Google. Plus, it also erases any WiFi network info stored on the unit. Thus, a reset ensures that the Chromecast will not connect to your Google account when the next person to own it after sale plugs it in.

Chromecast Audio Factory Reset: Step by Step

First, the factory reset button is on the side of the Chromecast receiver, near the micro USB power port at the top of the unit. We point this out with the blue arrow, shown in the following picture.

The Google Chromecast audio front view, reset button highlighted.

Then, we suggest that you unplug Chromecast Audio from any amps or speakers before factory resetting. Why? Because during reset, this unit may make some loud pops and clicks. Plus, these abrupt and loud noises could blow speakers and amps, set to higher volume levels.

Note too, that a reset severs the Chromecast Audio from the WiFi network it was signed into before. It also unlinks it from your Google account. So, factory resetting is always a good idea when you’re getting the unit ready for resale or gifting.

The side view, showing the Reset button highlighted.

So, with the Chromecast powered up, press and hold the Factory Reset button here with a thumb or index finger for three to six seconds. This starts the factory reset, when the pilot lamp near it turns orange.

Finally, the reset is done when the light flashes an orange, gradually fading light pattern.

The Chromecast Audio with a reboot in progress.

Again, you’ll need to set up your streamer again, as it will not work until you do.