Picture of the Echo Dot 4 clock speaker alongside a JBL Go 3 speaker.

Connect JBL Go 3 to Alexa

This post gives the procedure to Connect JBL Go 3 to Alexa. Since this pairing happens between the JBL and Alexa devices directly, you need not turn Bluetooth on in the mobile device you’re using to set up this connection.

Connect JBL Go 3 to Alexa: Step by Step

With your JBL Go 3 powered OFF (status lamp is dark), run through this routine to connect it to your Alexa Echo, Show, Studio, and Dot models. We use an iPad Air tablet to set this up.

1. Find the Alexa App on your Mobile Device

We found the app on the iPad Air as shown in the next shot. In this exercise, the app is in a custom folder that we set up called  HSmart Speakers, and pointed at by the greenish arrow.

Screenshot of the the Alexa App Icon in Folder on iPadOS.
The Alexa App Icon in Folder on iPadOS.

2. Run the Alexa App

The app displays its Home screen as we see in the next screenshot.

Screenshot of the More option on the Alexa App Home screen on iPadOS in 2022.
The More Option on the Alexa App Home Screen on iPadOS in 2022.

3. Tap the More Item to Continue with Connect JBL Go 3 to Alexa

Find the hamburger item in the lower right corner of the screen. We point at this with the green arrow in the last screenshot.

This brings up the Alexa app’s main menu, as shown in the next screenshot.

Screenshot of the Settings item on the Alexa app main menu on iPadOS.
The Settings item on the Alexa app main menu on iPadOS.

4. Tap the  Settings  Option on the Main Menu 

The  Settings   option we point at with the green arrow in the last photo.

This brings up the  Settings   screen, as in the next screenshot.

Screenshot of the Device Settings item on the Settings Page of the Alexa App on iPadOS.
The Device Settings item on the Settings Page of the Alexa App on iPadOS.

5. Tap the  Device Settings   Option

Touching   Device Settings   brings up the  All Devices   page, as shown next.

Screenshot of an Echo Dot 4 entry on the All Devices page of the Alexa app on iPadOS.
An Echo Dot 4 entry on the All Devices page of the Alexa app on iPadOS.

From here, choose which Echo device you wish to pair with your speaker.

6. Tap the Alexa Device you Wish to Connect

This takes you to the device-specific settings screen for the speaker you chose.

In this demo, we’re pairing from our  Thomas’s 2nd Echo Dot 4   speaker to our JBL Go 3, and so, its device specific settings screen looks as follows.

Screenshot of the Connect a Device item on the Echo Dot 4 Settings page of the iPadOS Alexa app.
The Connect a Device item on the Echo Dot 4 Settings page of the iPadOS Alexa app.

7. Tap the  Connect a Device  Item

Find the  Connect a Device  option pointed at by the  green  arrow in the last screenshot.

This brings up the   Setup   screen, as we show next.

Screenshot of the Pair Bluetooth Device Setup page on the Alexa app on iPadOS.
The Pair Bluetooth Device Setup page on the Alexa app on iPadOS.

At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this speaker will be the one that scans for BT devices.

Note that our Dot speaker found no devices so far.  But it will in the next steps, when we turn on the JBL Go 3 and put it in pairing mode.

8. Power Up the JBL Go 3

Bring your BT speaker close to your Alexa device to pair, and power up that speaker by pressing and releasing the Power button as we show in the next picture.

Right Side View of the JBL Go 3 Speaker, Showing the -Power- Button Highlighted.
Right Side View of the JBL Go 3 Speaker, Showing the -Power- Button Highlighted.

9. Place the Go 3 into Pairing / Discovery Mode

Put your speaker into pairing mode by pressing and releasing the Pairing button, as illustrated in the next picture.

Right side panel of the JBL Go 3 speaker, showing the -Bluetooth- button highlighted.
Right side panel of the JBL Go 3 speaker, showing the -Bluetooth- button highlighted.

10. Find the JBL Go 3 on the Alexa App SETUP Page

When you put the speaker into discovery mode, it should then appear in the Alexa app, on the Pair Bluetooth Device… page, as we see next.

Screenshot of the JBL Go 3 speaker showing as discovered on Echo speaker Bluetooth Setup page in the Alexa App on iPadOS.
The JBL Go 3 speaker showing as discovered on Echo speaker Bluetooth Setup page in the Alexa App on iPadOS.

Note that if your speaker does not show up on this page at this point, then try moving it very close to the Alexa speaker, closing and restarting the Alexa app, and then repeating steps 3 through 7 along with step 9 above.  We usually find that this gets the speaker to appear here as it should.

11. Find your Go 3 on the Discovered Devices List 

See the last screenshot above.  Our test speaker is there.

12. Finally, Pair your Alexa with your Go 3

Pair to the speaker by tapping its corresponding entry on the  Pair Bluetooth Device…  screen, we see in the last screenshot above.

Your Alexa speaker then pairs with the BT speaker.

The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen, which looks something like the following.

Screenshot of the JBL Go 3 speaker connected to an Echo Dot 4 on the Device Settings page in the Alexa app on iPadOS.
The JBL Go 3 speaker connected to an Echo Dot 4 on the Device Settings page in the Alexa app on iPadOS.

Note that our Bluetooth speaker now shows as connected.  Also, the JBL Go 3 makes the Speaker Paired sound (the three ascending guitar notes), and Alexa announces on the Go 3 that the connection has been made.

This speaker is now connected with your Alexa smart speaker. Its status lamp glows solid white to signal that successful pairing is in effect.

13. Done with Connect JBL Go 3 to Alexa !

We can now ask Alexa to play music or news, and those programs will come out of the Go 3. Be sure though, to speak to the Alexa speaker when making requests, and not the wireless speaker.  Even though the Go 3 is now paired with Alexa, the Alexa is still the speaker that receives voice commands through its internal far field microphones.

Other Posts About the JBL Go 3

    1. JBL Go 3 Blinking Red Light, How to Fix
    2. JBL Go 3 Watts
    3. How to Charge JBL Go 3
    4. JBL Go 3 Battery Indicator Explained
    5. How to Make JBL Go 3 Discoverable

References for How to Connect JBL Go 3 to Alexa

    1. JBL Go 3 Official Product Page at JBL.com
    2. Alexa Echo Product Page at Amazon.com
    3. Where to Buy the JBL Go 3

by

Tags: