Original Google Home smart speaker, during booting, along with AC power adapter plugged Into wall outlet.
You can hard reset all of the smart speakers in the Google Home family. These include the Original Google Home, the Mini, and the Max. Thus, reset any of these to restore proper operation. A hard reset readies the speakers for transfer to another person. Here, we show how to hard reset google home original speaker in the routine given next.
First, wait for speaker to boot. After it does, then move on to the next step.
Once the light ring finishes spinning and flashing, wait for it to go completely dark after booting finishes. Then, press and hold the Microphone Mute button. Find this button on the back near the top of the Google Home speaker, as shown next. Hold it in for roughly five seconds.
While holding in the mute button, notice that the ring of lights on the top begin glowing orange. In varying brightness patterns, these give a visual cue of a countdown to hard reset.
Then, after about five seconds, the speaker says, “You’re about to completely reset Google Home. To cancel, release the button.” Release the Microphone Mute button NOW if you decide not to erase all speaker settings.
So this continues with the hard reset. After a little while, the orange ring goes out. Then, the top turns white in a spinning pattern. At this time, the speaker performs its hard reset action, as shown next.
Then after about ten seconds, the unit’s top goes dark. Next, a system reboot starts, with a multi-colored pattern lighting up, as shown next.
Then, you hear the startup complete music and then the speaker speaks, “Welcome to Google Home. To start then, download the Google Home app on a phone or tablet.”
Then, after hard reset, the unit enters Setup mode. This means that the Google Home is now ready to accept setup directives from the Home app. The speaker tells us this by displaying the four white blips in a dimming and then brightening pattern.
The light ring turns white with the four dots lighting up, meaning setup mode. The unit then stays in setup until you run the setup routine. Note that the unit will not work until set up and linked to a Google account.
Feel free now, to give your Google Home to another person. Don’t worry that they’ll access the settings or personal info on your Google account. They won’t. Or, you can set it up again on your own account. Perhaps with a new WiFi network or device name.
Here, we list JBL Flip 4 speaker specs specifications. To summarize, these cover the speaker's…
This post shows how to connect Google Home Mini to Bluetooth speakers. Here, we show…
Gives the JBL Flip 4 firmware update procedure. This routine can take up to thirty…
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…