How to Connect Sony SRS XB32 to iPhone

An iPhone with a Sony SRS XB32 speaker.

This post shows how to connect a Sony SRS XB32 wireless speaker to an iPhone smart phone. Doing this gives you a much bigger, and clearly better sound when you stream music from the iPhone to speakers like this one.

How to Connect Sony SRS XB32 to iPhone, Step by Step Details

With the XB32 switched OFF (power button is dark), run through this routine to connect it to your iPhone device. For this demo, the test phone is an iPhone 12 Pro Max.

1. Go to the Home Screen on your Device

Firstly, press and release the side button (right edge of the cell phone) and enter your passcode or Face Id to bring up the Home screen.

2. Find the Settings App

Next, flip through the Home screen pages until you find the Settings app. We found ours on the second page of the Home screen, as shown next.

iPhone -Home- screen showing the -Settings- app.

3. Bring up the Settings App

Thirdly, tap the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

iPhone -Settings- page, showing the -Bluetooth- option.

4. Go to the Bluetooth Option to Continue with How to Connect Sony SRS XB32 to iPhone

Tap the Bluetooth item on the Settings page.

Then you get the Bluetooth Settings screen, as we show next.

The iPhone -Bluetooth Settings- page.

Note that our Bluetooth is running here. But since our test Sony SRS XB32 speaker is currently shut OFF (is not in Bluetooth pairing mode), it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this iPhone before.

5. Turn On your Speaker

Turn on the XB 41 by quickly pressing its Power button. See this, pointed at by the aqua arrow, in the next picture.

Sony SRS XB32 speaker -Power- button.

The speaker then boots, and its status lamp glows, as we see in the next picture.

The -Power- light glowing

Also, the Bluetooth Status lamp may blink in some pattern to indicate that the speaker is ready to answer a Bluetooth pairing request. Or, it may automatically connect to some nearby device. But no matter. This procedure works the same regardless.

The Bluetooth Status light blinking.

If this lamp blinks slowly, then it’s passively waiting for a Bluetooth connection request to come in. It does not transmit its connection data in this mode.

But if it fast flashes, then it is indeed broadcasting its pairing information over Bluetooth so other devices can find it. I.e. The speaker is in pairing mode in this case.

Moreover, since our test iPhone does not know about this speaker, this speaker will not pair with it automatically.

6. Put the XB32 into Discovery Mode

Now, to see this speaker on your iPhone, place it into Bluetooth pairing mode if it’s not in that mode already. To do that, press the Power-Pairing button. Then release it when the unit makes a rising beep noise and speaks that it’s in pairing mode by saying, “Bluetooth pairing.” Also, the Bluetooth Status lamp begins its rapid blue flashing pattern, as we see in the last picture.

Find the Power-Pairing button at the rightmost position on the top button panel on the speaker.

7. Find the Speaker on your Phone to Continue with How to Connect Sony SRS XB32 to iPhone

See the screen shot next. We found our speaker, as shown next.

The iPhone Bluetooth Settings page, showing a Sony SRS XB32 speaker as Discovered.

8. Connect with the XB32

Tap the listed speaker in the Other Devices list.

The iPhone then pairs with the test speaker here.

I.e. The iPhone’s Bluetooth Settings screen might then change to look something like the following. Note the now-paired Sony SRS XB32 entry, as we point out with the green arrow next.

The iPhone Bluetooth Settings page, showing a Sony SRS XB32 speaker as Connected.