Picture of the Sony SRS XB43 speaker with an iPhone12.

How to Connect Sony SRS XB43 to iPhone

This post shows how to connect a Sony SRS XB43 wireless speaker to an iPhone smart phone.  Doing so gives you a much bigger, and clearly better sound when you stream music from the iPhone to speakers like this one.

How to Connect Sony SRS XB43 Speaker to iPhone, Step by Step Directions

With your Sony speaker switched OFF (power button is dark), run through this routine to connect it to your iPhone mobile device. For this demo, we use an iPhone 12 Pro Max.

1. Go to the Home Screen on your Device

Firstly, press and release the side button (right edge of the phone) and enter your passcode or Face Id to bring up the Home screen.

2. Find the Settings App

Next, flip through the Home screen pages until you find the Settings app.  We found ours on the second page of the Home screen, as shown next.

The -Settings- app icon on the iPhone -Home- screen. How to Connect Sony SRS XB43 Speaker to iPhone.
iPhone -Home- screen showing the -Settings- app.

3. Bring up the Settings App

Thirdly, tap the Settings app icon.

The smart device then shows the first page of its settings, as shown in the next step.

Screenshot of the -Bluetooth- option on the iPhone -Settings- page.
iPhone -Settings- page, showing the -Bluetooth- option.

4. Go to the Bluetooth Option to Continue with How to Connect Sony SRS XB43 Speaker to iPhone

Tap the Bluetooth item on the Settings page.

Then you get the Bluetooth Settings screen, as we show next.

Screenshot of the -Bluetooth Settings- page on an iPhone.
The iPhone -Bluetooth Settings- page.

Note that our Bluetooth is running here. But since our test Sony SRS XB43 speaker (the XB43) is currently shut OFF (is not in Bluetooth pairing mode), it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this iPhone before.





5. Turn On your Speaker

Turn on the Bluetooth speaker by quickly pressing its  Power  button. See this, pointed at by the green arrow, in the next picture.

Picture of a typical Sony SRS XB43 speaker Power button.
A common Sony SRS XB43 speaker, showing the -Power- button.

The speaker then powers up, and its status lamp glows, as seen in the next picture.

Picture of the Power lamp glowing. How to Connect Sony SRS XB43 Speaker to iPhone.
The Power lamp glowing.

Also, the Bluetooth lamp will blink in some pattern to indicate that the speaker is ready to receive a Bluetooth pairing request, as we see in the next picture.

Picture of the flashing Bluetooth Status lamp on the speaker.
The blinking Bluetooth Status light.

If it blinks evenly, then it’s passively waiting for a Bluetooth connection request to come in.

But if it fast flashes or blinks in a pulse-pulse-pause, pulse-pulse-pause pattern (double flashing), then it’s broadcasting its pairing information over Bluetooth so other devices can find it. I.e. The speaker is in pairing mode in this case.

Moreover, since our test iPhone does not know about this speaker, this Sony SRS XB43 speaker will not pair with it automatically.

6. Put the XB43 into Pairing Mode

Now, to see this speaker on your iPhone, place it into Bluetooth pairing mode if it’s not in that mode already. To do that, press the Pairing button. Then release it when the unit beeps and speaks that it’s in pairing mode. Also, the Bluetooth Status lamp begins its rapid or pulse-pulse-pause, pulse-pulse-pause flashing pattern, as we see in the last picture.

Find the Pairing button on the top button panel, second button from the left as shown next.

The -Pairing- button on the Sony SRS XB43 Bluetooth speaker.
Sony SRS XB43 Bluetooth Speaker, Showing the -Pairing- Button.

7. Find the Speaker on your Phone to Continue with How to Connect Sony SRS XB43 Speaker to iPhone

See the screen shot next. We found our speaker, as we point out with the green arrow.

Screenshot of the iPhone -Bluetooth Settings- screen showing a Sony SRS XB43 speaker as discovered but not connected
The iPhone -Bluetooth Settings- screen showing a Sony SRS XB43 speaker as discovered but not connected

8. Connect with your Bluetooth Speaker

Tap the listed speaker in the Other Devices list.

The iPhone then pairs with the test speaker here.

I.e. The iPhone’s Bluetooth Settings screen might then change to look something like the following.  Note the now-paired Sony SRS XB43 entry, as we point out with the green arrow in the next screenshot.

Screenshot of the iPhone -Bluetooth Settings- screen, showing the Sony SRS XB43 speaker as Connected. How to Pair Sony SRS XB43 with iPhone.
The iPhone -Bluetooth Settings- screen, showing the Sony SRS XB43 speaker as Connected.

9. Done with How to Connect Sony SRS XB43 speaker to iPhone !

At last, we have now successfully connected the test speaker with a popular iPhone.





Other Posts About the Sony SRS XB43 Speaker

  1. How to Check Sony SRS XB43 Battery Life
  2. Sony SRS XB43 Charging Instructions
  3. How to Pair Sony SRS XB43 with iPhone
  4. Sony SRS XB43 Low Frequency Mode for Extra Bass !
  5. How to Pair Sony SRS XB43 Bluetooth Speaker

Related Posts to How to Connect Sony SRS XB43 Speaker to an iPhone

  1. How to Connect Sony Bluetooth Speaker to iPhone
  2. Sony SRS XB13 How to Connect to iPhone
  3. How to Connect JBL Speakers to iPhone
  4. How to Connect JBL Flip 5 to iPhone
  5. Connecting the Sony SRS XB12 Speaker to an iPhone

References

  1. Sony SRS XB43 Portable Speakers Product Page at Sony.com
  2. iPhone Official Product Page at Apple.com

Revision History

  • 2021-10-04: First published.
%d bloggers like this: