An iPhone with a Sony SRS XB33 speaker.
This post shows how to connect a Sony SRS XB33 to an iPhone smart phone. Doing so gives you a much bigger, and clearly better sound when you stream music from the iPhone to speakers like this one.
With the XB33 switched OFF (power button is dark), run through this routine to connect it to your iPhone mobile device. For this demo, the test phone is an iPhone 12 Pro Max.
Firstly, press and release the side button (right edge of the phone) and enter your passcode or Face Id to bring up the Home screen.
Next, flip through the Home screen pages until you find the Settings app. We found ours on the second page of the Home screen, as shown next.
Thirdly, tap the Settings app icon.
The smart device then shows the first page of its settings, as shown in the next step.
Tap the Bluetooth item on the Settings page.
Then you get the Bluetooth Settings screen, as we show next.
Note that our Bluetooth is running here. But since our test Sony SRS XB33 speaker is currently shut OFF (is not in Bluetooth pairing mode), it does not show up in the BT devices list. Also, we don’t see it since we’ve never paired this speaker with this iPhone before.
Turn on the XB 33 by quickly pressing its Power button. See this, pointed at by the yellow arrow, in the next picture.
The speaker then boots up, and its status lamp glows green, as we see in the next picture.
Also, the Bluetooth Status lamp will blink in some pattern to indicate that the speaker is ready to answer a Bluetooth pairing request.
If this lamp blinks evenly, then it’s passively waiting for a Bluetooth connection request to come in.
But if it fast flashes or blinks in a pulse-pulse-pause, pulse-pulse-pause pattern (double flashing), then it’s broadcasting its pairing information over Bluetooth so other devices can find it. I.e. The speaker is in pairing mode in this case.
Moreover, since our test iPhone does not know about this speaker, this test speaker will not pair with it automatically.
Now, to see this speaker on your iPhone, place it into Bluetooth pairing mode if it’s not in that mode already. To do that, press the Pairing button. Then release it when the unit beeps and speaks that it’s in pairing mode. Also, the Bluetooth Status lamp begins its rapid or pulse-pulse-pause, pulse-pulse-pause flashing pattern, as we see in the last picture.
Find the Pairing button on the top button panel, second button from the left as shown next.
See the screen shot next. We found our speaker, as shown next.
Tap the listed speaker in the Other Devices list.
The iPhone then pairs with the test speaker here.
I.e. The iPhone’s Bluetooth Settings screen might then change to look something like the following. Note the now-paired Sony SRS XB33 entry, as we point out with the green arrow next.
At last, we have now successfully connected the XB33 test speaker with a popular iPhone.
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…
You can hard reset all of the smart speakers in the Google Home family. These…
Covers How to Hard Reset Google Home. Now you can reset this original version of…
Gives the iPod Touch hard reset procedure. Now a hard reset restores all settings to…