How to Reset HP 3630 DeskJet

If your HP 3630 series printer ever behaves strangely, do a reset.  Reset also to update its WiFi settings.  Furthermore, this restores the 3630 to default settings.  Once the reset ends, you can set the printer up anew.  E.g. You can enter new printer settings, to reconnect it to a WiFi network, or to a new network. Thus in this demo, we do this default reset on the HP DeskJet 3630 printer  scanner, copier, all-in-one printer.

How to Reset HP 3630 DeskJet: Step by Step

1. Turn Printer On

First, press and quickly release the Power button.

Find the Power button as shown on the 3630, by the pink arrow in the next photo.

2. Wait for Printer to Finish Starting Up

Secondly, power up finishes when all printer noise stops, and the Power button glows steady white after the 3630 boots.

3. Next, Press and Hold the Power Button

But don’t release it though, until you run the next two steps.

4. Then, Quickly Press and Release the Start Copy Black Button Twice

Then, while holding in the Power button, also press and release Start Copy.

The next picture shows where this button is on the 3630.  The pink arrow points out the Copy button.

5. Next, Press and Release the Cancel (Red X) Button Three Times

See where it is in the next picture.

6. Wait for WiFi Network Status Light to Blink White

Find the light as shown in the next picture.

Finally, when it blinks, the 3630 deletes the old information from its memory. Then, the printer is ready for programming with new wireless network details.

7. Done !

Lastly, set up your HP 3630 printer.  Indeed, it’s back to its factory default (brand new) settings.

Other HP DeskJet 3630 Posts

1. 1. How to Replace Empty Ink Cartridges
   2. HP Deskjet 3630 Series Ink Cartridges Details

References for How to Reset HP 3630 DeskJet

1. 1. Where to Buy the HP DeskJet 3630