Front left view of the Sony SRS XB33 speaker.

How to Reset Sony XB33

Show you how to reset your Sony XB33 Extra Bass speaker to its default settings.  Resetting restores the XB33 to default state. Plus, resetting erases any earlier paired Bluetooth devices from its memory. Clearing these stops this speaker from pairing to any nearby Bluetooth devices. Also, you might reset to get it ready for sale or re-gifting, or to stop it from syncing wirelessly with devices you no longer wish it to connect with.

How to Reset Sony XB33, Step by Step

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as shown in the next picture.

The -Power- button on the Sony XB33.
Sony XB33 -Power- button.

Find the Power button, as shown in the last picture above.

Then, the status light comes on, as shown next.

Picture of the Sony XB33 -Power- lamp lit up.
Sony XB33 -Power- lamp lit up.

The speaker may make a ding-dong tone sound when it powers up and announce that it has paired, should it connect to a nearby device. Or it may make no sound at all if not.  But whether the unit pairs or not though, this reset routine works the same way, as follows.

2. Press and Hold the Pairing and Volume DOWN Buttons Together

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

The -Bluetooth Pairing- and -Volume DOWN- buttons.
The -Bluetooth Pairing- and -Volume DOWN- buttons.

The XB33 then enters reset mode.

Then after a brief pause, the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on the SRS XB33, there is no power-down sound.

The dark -Power- light.
The dark -Power- lamp.

3. Check that your Sony XB33 Did Indeed Reset

Next, power on the unit again, as detailed in step 1 above.

Note that after reset, the XB33 comes up in discovery mode. The Pairing Mode lamp double blinks blue to let you know this.

The glowing -Bluetooth Status- light.
The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with How to Reset a Sony XB33 !

The reset is now finished. So you may now sell or gift it, or pair it again with your favorite Bluetooth devices.

After a reset, the XB33 no longer automatically connects with any previously paired Bluetooth device. Thus, to restore auto pairing, you manually pair it with a device. Then, any time that both speaker and that device have Bluetooth turned on, and they’re near to each other, pairing automatically takes place once more.

Related Posts

    1. How to Reset Sony SRS XG500
    2. How to Reset Sony Speaker
    3. How to Reset Google Mini Speaker
    4. How to Reset Sony SRS XB13
    5. How to Reset Sony Bluetooth Speaker
    6. How to Reset Sony X11

Other Sony XB33 Posts

    1. Sony XB33 Buttons Explained
    2. Sony XB33 Charging Instructions
    3. Sony XB33 Pairing Two Speakers
    4. How to Connect Sony XB33 to Alexa
    5. Sony XB33 Firmware Update Instructions


    1. Sony XB33 Official Support Page
    2. Where to Buy the Sony XB33

Revision History

    • 2023-03-10: First published.