HP DeskJet 3632 Wireless Setup Instructions

Perform this HP DeskJet 3632 wireless setup instructions to clear out the existing WiFi setting.  You can also and connect this printer to a different Wifi network in this procedure.

You must change WiFi networks after replacing a router / access point that has a different network credentials. Furthermore, you may also have to do this when moving the printer to a different office or home location.  So, here’s how to accomplish this.

We assume here that you have previously installed HP’s All-In-One app on your device you want to print from.  So we won’t delve into setting up that app in this post.

HP DeskJet 3632 Wireless Setup Instructions: Step by Step

1. First, Reset Printer’s Wireless Settings back to Factory Default Values

Hard reset the printer by following the instructions in our How to Reset HP Printer, 3630 Series DeskJet  article.

2. Find the HP All-In-One (AiO Remote) Printer Support App

We’re running an iOS-based tablet here

3. Run the AiO Remote App by Tapping It to Continue with HP DeskJet 3632 Wireless Setup Instructions

It then comes up as shown next.

In our case, we had this printer configured previously.  So it shows up at the top of the AiO Remote home screen. Now perhaps you are setting up the printer on a different device altogether. If so, then skip the next step. The app will immediately give you the opportunity to add a printer in this case.

4. Tap the Offline Printer

Then note the red dot by the printer name, above the ink cartridge status indicator. This dot means that your tablet is unable to connect to the printer through the current network. Tapping this entry gives you the opportunity to select a different printer.

5. Tap the   Select a Different Printer Option   

Find this highlighted in the previous picture.  You then get the   My Printer  screen, as shown next.

6. Tap the   Add Printer   Link to Continue with HP DeskJet 3632 Wireless Setup Instructions

Top right corner of screen.  This brings up the   Add Printer   window, as pictured next.

7. Tap the  Set up and Add a New Printer   Option

Then this brings up the Agreements screen, as displayed next.

8. Read the Agreements Screen to Continue with HP DeskJet 3632 Wireless Setup Instructions

Check the  I have reviewed and accept the agreements and settings   check box. Then move on to the next step.

If not however, then close the app, without setting up the printer.

9. Tap the   Continue   Button

This brings up the   Connect to Printer  screen, as shown next.

10. Bring Up your Mobile Device’s Wi-Fi Settings Screen

Find the Wi-Fi Settings as shown next. For our iPad, we pressed the home screen, ran the Settings app, and then tapped  Wi-Fi settings.

11. Tap the   HP-Setup>F5-DeskJet 3630 series   Network to Continue with HP DeskJet 3632 Wireless Setup Instructions

Then this action temporarily disconnects your tablet from your usual Wi-Fi network. It then connects the tablet to this temporary HP hotspot network that the printer broadcasts.  A screen such as the following then displays.

12. Tap the Notification to Go Back to the AiO Remote App

Now the notification may disappear before you have a chance to tap it. Indeed you only get a few seconds to poke it before it goes away. So if that happens, then just close the  Wi-Fi Settings  window. Then locate the AiO Remote app on your  Home  screen as in step 2 above, and tap on that.  Either way you choose, the app then displays the  Connect Printer to Network  screen.

13. Tap the Desired Wi-Fi network for Connecting the HP DeskJet 3632

In our case, we’re connecting this printer to the 937T681J4059H_2G Wi-Fi network.  Tapping the desired network brings up the password entry screen, as shown next.

14. Enter your Wireless Network Password to Continue with HP DeskJet 3632 Wireless Setup Instructions

Type the password into the field arrowed in the previous picture, and then hit the Return or Go key.  The 3632 then attempts to connect to the selected network.

15. Watch the Wireless Status Lamp

That light stops flashing and glows a steady white once the printer successfully connects to the wireless network.

On the tablet, the  Reconnect your iPad to your network   screen displays.

However, we notice that sometimes, the  Connecting  screen in step 14 above does not disappear. So at times, this screen persists even after the printer itself connects.  When this occurs, we simply close the AiO app with the Home key. Then we reopen it.

16. Reconnect your Mobile Device to your Wi-Fi Network

Then go back to your tablet’s Wi-Fi settings screen and locate your original wireless network and connect to it.  Note that this may happen automatically once your printer connects.  However, if not, just do it manually.

17. Return to the AiO Remote App Home Screen to Continue with HP DeskJet 3632 Wireless Setup Instructions

Do this by closing the Wi-Fi Settings screen in the previous step. To do that, hit the Home key. Then once again bring up the HP AiO Remote app, as you did in step 2 above.  If the AiO home screen does not appear, then press the Home icon in whatever screen is showing.  This should take you there.

18. Verify that Printer is Now Visible in the AiO Remote App

Then note the green status light beside the 3632 printer. This indicates that the printer is now online.

19.  HP DeskJet 3632 Setup Instructions Now Complete !

At last, your HP 3632 wireless printer is now ready to print.

Other Posts About the HP DeskJet 3632

1. Reset HP Deskjet 3632
2. How to Install HP DeskJet 3632

References for HP DeskJet 3632 Wireless Setup Instructions

1. 1. Where to Buy the HP DeskJet 3632