JBL Clip 2 Bluetooth speaker, front view, horizontal.
An adequate JBL Clip 2 charger is a USB car or AC charger that delivers a nominal 2 amps at 5 volts (10 watts or more). Note that currently, JBL did not provide a compatible AC or car charger with its Clip 2 Bluetooth speaker. So, you’ll need one already on hand, or buy an accessory charger.
We’ve successfully charged our Bluetooth JBL Clip 2 speaker with the wall chargers, listed next. Note that all these accessory speaker chargers feature a USB A type female connector. You’ll need a similar adapter to these to connect your Clip 2 to use the orange USB charging cable that comes with the Clip 2, pictured next.
This charger is available at Amazon.com. See it’s product page here. At under twelve dollars US, this dual USB port AC wall charger is small enough for easy portable use, but not so small that you’ll easily lose it. Charges the JBL Clip 2 quickly and completely.
This hefty household wall charging station offers all the current you need for charging your Clip 2. It delivers full USB 2.0 power on every one of its ten output ports. So, you won’t raise JBL Clip 2 charging time when you recharge more than one device on it. In fact, this ten port charger supplies enough energy to recharge all models in the JBL Clip line of portable Bluetooth speakers. Find this useful USB accessory here at Amazon.com. We also reviewed this charging station here.
This CE Tech charging station is another substantial unit, well designed for recharging all JBL Clip speakers in rapid time. This well built USB power hub is available on eBay for under thirty dollars US here. We’ve also reviewed this four port charging station here.
Find this AC USB charger, or one nearly like it at Amazon.com here. At less than twelve dollars, this dual port AC USB wall adapter, with its fold able AC prongs, is small enough to fit in any mobile device accessory kit. It’s also convenient when you take your speaker on vacation, because it features a night light. Makes finding your way around unfamiliar hotel rooms a snap. See our GE Jasco 2.1 Amp USB Charger, Y14 Review post for more details on this affordable and practical JBL Flip 4 USB charger solution.
Finally, if you bought the JBL Charge 3 speaker brand new, you no doubt found this JBL AC adapter in the box. We’ve found that while this wall charger does not come with our Clip 2, it charges the speaker very well nonetheless. See our JBL Charge 3 Bluetooth Speaker USB AC Charger Adapter Specs for further details.
So, we hope this short list of compatible AC USB adapters helps you choose a suitable JBL Clip 2 charger for your Clip Bluetooth speaker. Good luck.
Defective charger or USB power cable often causes charging problems. So try different but compatible charger adapters and micro USB to A cables.
Also, a broken USB charging port on the Clip 2 can result in low or non charging situations. For this, take the speaker to a qualified technician for a port replacement.
Then too, faulty or aged batteries can refuse to charge. So replace the battery to solve.
Finally, a malfunction in the Clip 2 electronics inside the speaker can cause non charging. Replace the speaker to solve this problem.
The internal battery may have discharged completely. Happens when the speaker is run down to non operating status without a battery recharge. Prolonged battery “deadness” can permanently damage the battery, rendering it incapable of recharging. Replacing the battery with a fresh one often solves this problem.
Also, a faulty AC charger or USB cable could result in speaker non responsiveness. To fix, try swapping out the charger and the cord with a known good unit and see if the problem continues.
Finally, see the previous question for further details.
The Clip 2 JBL speaker can fully recharge in under three hours from a completely dead battery state, when using a wall charger that provides adequate power.
Here, we list JBL Flip 4 speaker specs specifications. To summarize, these cover the speaker's…
This post shows how to connect Google Home Mini to Bluetooth speakers. Here, we show…
Gives the JBL Flip 4 firmware update procedure. This routine can take up to thirty…
You may experience Wi-Fi connection errors when booting your original Google Home speaker. Or, the…
The JBL Charge 3 features several controls and lights across its top, as well as…
Here we give the hard reset Google Home Mini speaker routine. You might hard reset…