JBL Flip 5 Factory Reset Instructions

Gives JBL Flip 5 factory reset instructions to return the 5 to default settings.  Resetting erases any earlier paired Bluetooth devices from its memory.  Clearing these stops it from pairing to any nearby Bluetooth devices after the reset.  Also, you might factory reset to get it ready for sale or re gifting. Or to stop it from pairing with devices you no longer have interest in.

JBL Flip 5 Factory Reset Instructions: Step by Step

1. Turn on the JBL Flip 5

Press and hold the Power button until it lights up.

Then, the Power button lights up along with the battery power scale, as shown next.  Here, since we’ve paired the speaker with Bluetooth devices before this, it does not enter Bluetooth discovery mode.  We know that because the Power button is glows solid gray, rather than blinking blue.

2. Wait for the Power Up Sound

The JBL Flip 5 makes a rising rock guitar strum sound when it comes on.  The Flip is ready for use after this sound finishes up.

3. Press the Volume UP and Play-Pause Buttons Together to Start the Factory Reset

See the next picture to find the Play-Pause and UP Volume buttons.

The Flip 5 JBL then enters factory reset. Note that both the Bluetooth and Power buttons light up gray white for a couple seconds.  Shown next.

Then after a short pause, the JBL Flip 5 turns off.  All the lights go off, and it plays the power-down guitar sound.

4. Check that JBL Flip 5 Factory Reset Worked

Next, power on the device again, as detailed in step 1 above.

Now this time, after reset, our JBL speaker comes up in Bluetooth discovery mode, as shown next.  Note that the Bluetooth button blinks white to denote this.  When the   Bluetooth  button blinks, this means that the unit doe snot currently have a pairing.  Indeed, we expect it not to auto pair to anything after a factory reset.

5. Done with JBL Flip 5 Factory Reset Instructions !

Resetting is now complete.  You may now pack up the speaker for sale, or pair it again with your favorite BT devices.  The unit will no longer automatically connect with any previously paired Bluetooth device that is in range.  To restore automatic Bluetooth pairing, manually pair the Flip 5 with a tablet or phone.  Then, any time that both speaker and that device have Bluetooth turned on, pairing with automatically take place once more.

Other Posts About the JBL Flip 5

1. 1. JBL Flip 5 Charger Type, Replacement
   2. How to Bass Boost
   3. Pairing JBL Flip 5 – How Do You Do It?
   4. Firmware Upgrade Instructions
   5. How to Restart

References for JBL Flip 5 Factory Reset Instructions

1. 1. JBL Flip 5 Official Product Page