JBL Flip 6 Specs Watts

The JBL Flip 6 is a moderate power speaker with enough watts in the specs to fill a typical room.

But what do the watts a BT speaker has, tell us about how good it is?  Firstly, the watt is a measure of how much power the speaker requires and outputs.  Plus, this metric is a nifty comparison measure. Why? Because generally speaking, speakers with more watts of audio output tend to play louder than those with less.

True, they do cost more, have bigger, heavier batteries and chargers, along with larger drivers and magnets. Yet they nonetheless offer some big plusses.  They have more dynamic range, and deeper bass. And the models that play in stereo offer typically a bigger soundstage to listeners.

Thus in general, the more powerful the speaker, the better it sounds, even at lower volume. You get better clarity due to higher accuracy reproduction of the bass, midrange, and treble. Plus, more reserve power likely means less clipping distortion too, even at higher volumes. So, the speaker’s maximum watts output is a primary indicator of speaker quality and performance.  And as such, this value is of great interest to audiophiles and novice listeners alike.

In this case, the Flip 6, is a decently loud model for all the bigger it is. Its watts can fill a small to medium size party area with clear and full music.

JBL Flip 6 Specs Watts: The Details

1. 1. Battery Capacity: 17.28 watt-hours (3.6 volts, 4.8 amp-hours).
   2. USB Charger Power: 15 watts (5 volts at 3 amps).
   3. Power Bank Output Power: Not available on this speaker.
   4. Play Time Per Recharge: Up to 12 hours.
   5. Total Audio Output Power on AC (RMS): 30 watts (20 watts for the woofer, and 10 watts for the tweeter).
   6. Total Peak Audio Power: 42.4 watts.
   7. Output Power per Channel: 30 watts RMS (only one channel in this speaker).

Notes on JBL Flip 6 Specs Watts

1. 1. This speaker may not input enough power from a low power USB AC adapter (under 15 watts capacity). So it can’t keep the battery from discharging when playing at full volume, depending on what you’re listening to.  So even with the Flip 6 fed from external power, you could still see it shut OFF abruptly.  Thus when this occurs, just stop playing it for an hour or two while charging. Then, fire it up again for continued party enjoyment.

Other Posts About the JBL Flip 6

1. 1. JBL Flip 6 Not Charging Problem Solved
   2. How to Fix When the Red Light Won’t Turn Off
   3. JBL Flip 6 Won’t Turn On Issue
   4. How to Hard Reset
   5. Bass Mode Explained

References

• 1. Official Product Page for the JBL Flip 6