Picture of the right front of the JBL Flip 6 speaker.

JBL Flip 6 Specs Watts RMS

The Flip 6 JBL Bluetooth speaker by Harman Kardon is a moderate to medium power, desktop style unit with enough RMS watts in the specs to fill a typical size room with full sounding tunes.

But what do the watts a BT speaker has, tell us about how good it is?  Firstly, the watt is a measure of how much power the speaker requires and outputs.  Plus, this metric is a nifty comparison measure. Why? Because generally speaking, speakers with more watts of audio output tend to play louder than those with less.

While they do cost more, have bigger, heavier batteries and chargers, along with larger drivers and magnets, they nonetheless offer some big plusses.  They have more dynamic range, a deeper bass response, and the models that play in stereo offer typically a bigger soundstage and better sound imaging to listeners.

Picture of The JBL Flip 6 speaker while recharging.
The JBL Flip 6 speaker as it charges.

Thus in general, the more powerful the speaker, the better it sounds, even at lower volume. You get improved clarity due to higher accuracy reproduction of the bass, midrange, and treble parts of the music. Plus, more reserve power likely means less clipping distortion too, even at higher volumes. So, the speaker’s maximum watts output is a primary indicator of speaker quality and performance.  And as such, this value is of great interest to audiophiles and novice listeners alike.

In this case, the Flip 6, as a smaller Bluetooth speaker, is a decently loud model for all the bigger it is. Its watts can fill a small to medium size party area with clear and full music. See below for details on its power output.





JBL Flip 6 Specs Watts Details

    1. Battery Capacity: 17.28 watt-hours (3.6 volts, 4.8 amp-hours).
    2. USB Charger Power: 15 watts (5 volts at 3 amps).
    3. Power Bank Output Power: Not available on this speaker.
    4. Play Time Per Recharge: Up to 12 hours.
    5. Total Audio Output Power on AC (RMS): 30 watts (20 watts for the woofer, and 10 watts for the tweeter).
    6. Total Peak Audio Power: 42.4 watts.
    7. Output Power per Channel: 30 watts RMS (only one channel in this speaker).

Notes on JBL Flip 6 Specs Watts

    1. This speaker may not input enough enough power from a low power USB AC adapter (under 15 watts capacity) to keep the battery from discharging when playing at full volume, depending on what you’re listening to.  So it could happen that even with the Flip 6 fed from external power, you could still see the music shut OFF abruptly.  Thus on the (rare) times that this occurs, just stop playing the speaker for an hour or two, to let it build up some reserve battery power while charging. Then, fire it up again for continued party enjoyment.

Related Posts to JBL Flip 6 Specs Watts

    1. JBL Go 3 Specs Watts RMS
    2. Sony SRS XP500 Specs Watts RMS
    3. Watts According to the Specs for the Sony SRS XG500 Party Speaker
    4. Sony SRS XG300 Specs RMS Watts Output
    5. XE300 SRS Sony Speaker Specs Watts RMS

Other Posts About the JBL Flip 6 BT Speaker

    1. JBL Flip 6 Not Charging, How to Fix
    2. JBL Flip 6 Red Light Won’t Turn Off, How to Fix
    3. How to Turn On JBL Flip 6 Speaker
    4. JBL Flip 6 Won’t Turn On Issue
    5. How to Hard Reset the JBL Flip 6

References

Revision Log

    • 2023-01-22: First published.
%d bloggers like this: