JBL Flip 6 Won’t Turn On

When your JBL Flip 6 speaker won’t turn on, this could be due to one or more issues.  First, your speaker might be broken and not repairable. Or the battery is dead and needs recharging.  Furthermore, if the battery won’t charge, then the battery itself may be bad, or your charger or AC power source … Continue reading JBL Flip 6 Won’t Turn On



JBL Flip 6 Bluetooth Pairing Instructions

This post gives JBL Flip 6 Bluetooth pairing instructions These work when pairing with the iPhone, iPod Touch, and the iPad line of Apple phones, media players, and tablets. However, similar procedures work for Android devices as well. JBL Flip 6 Bluetooth Pairing Instructions With your JBL Flip 6 OFF (all lamps are dark), run … Continue reading JBL Flip 6 Bluetooth Pairing Instructions



How to Put JBL Flip 6 in Pairing Mode

To pair the Flip 6 JBL speaker with a Bluetooth source device for the first time, or to revise the connection information stored on that device, you must know how to kick off pairing mode on the speaker. In this mode, the Flip 6 sends out its Bluetooth name and current linkage data over the … Continue reading How to Put JBL Flip 6 in Pairing Mode



JBL Flip 6 Low Frequency Mode

Unfortunately, the usual way adjust the bass response of the JBL Flip 6, by turning on and off its low frequency mode does not seem to work. Plus, we know of no other way to activate this mode. Hopefully, JBL will re add this feature in a later version of the firmware. But if this … Continue reading JBL Flip 6 Low Frequency Mode



JBL Flip 6 Firmware Update Instructions

Here’s our JBL Flip 6 firmware update instructions.  This routine can take five to ten minutes to finish, depending on the speed of your WiFi connection and how fast your mobile device is.  Note though that you can’t reverse this once done.  That is, you won’t be able to return to any prior firmware version … Continue reading JBL Flip 6 Firmware Update Instructions



How to Connect JBL Flip 6 to iPhone

This post shows how to connect a JBL Flip 6 Bluetooth speaker with the iPhone. How to Connect JBL Flip 6 to iPhone, Step by Step With your Flip 6 powered OFF (power button is dark), run through this routine to connect it with your iPhone. 1. Navigate to the Home Screen on the iPhone … Continue reading How to Connect JBL Flip 6 to iPhone



How to Hard Reset JBL Flip 6

Shows how to hard reset the JBL Flip 6 Bluetooth speaker to return it to default hard settings.  Hard resetting erases any prior paired Bluetooth devices from its memory.  Deleting these stops it from connecting to any nearby Bluetooth devices after the hard reset.  Also, do this to get it ready for sale or re … Continue reading How to Hard Reset JBL Flip 6



JBL Flip 6 Red Light Stays On, How to Fix

Many JBL speakers, including the Flip 6, have a light that glows or blinks red when the battery is almost out of power. In the case of the Flip 6 here, we see this lamp in the battery gauge on the front button panel. But sometimes, this light stays on or flashes for long periods … Continue reading JBL Flip 6 Red Light Stays On, How to Fix



JBL Flip 6 Not Charging, How to Fix

Most JBL Bluetooth speakers, including the Flip 6 Bluetooth model, offer truly portable operation via their lithium ion batteries inside. And when said battery dies, you can recharge the speaker with an AC or car adapter. Sometimes though, you may find that the JBL Flip 6 is not charging fully, or at all, even when … Continue reading JBL Flip 6 Not Charging, How to Fix



JBL Flip 6 Power Button Not Working Fix

When the Power button on your JBL Flip 6 is not working, this likely means one or more things.  Now in this models, one or more of the following causes may be the reason this button does not work. The button mechanisms may have sand, dirt, or other debris in them. To repair this, take … Continue reading JBL Flip 6 Power Button Not Working Fix