Picture of the front top of the Wonderboom 2. Showing the glowing red light.

JBL Wonderboom 2 Check Battery Level

Gives the JBL Wonderboom 2 Check Battery Level procedure, and explains how to know if the battery is losing capacity over time.  When you press the right buttons while the speaker is running, it emits one or more sound pulses to tell you how full the battery is, as described below.

JBL Wonderboom 2 Check Battery Level: Step by Step

1. First, Power Up the JBL Wonderboom 2

You won’t be able to read battery level unless the speaker is ON.

Picture of The top of the JBL Wonderboom 2. Showing the dark -Power- button.
The Top of the JBL Wonderboom 2. Showing the dark -Power- button.

To turn on the speaker, press and release the Power button, pointed out by the yellow arrow the last picture.

The small lamp in that button should then light, as we see next, and the speaker should make its startup sound.  If it does not, then the battery could be completely dead.

Picture of the -Power-button glowing white.
The -Power-button glowing white.

But as long as there’s some energy in the battery, the speaker should boot.  When it does, move ahead to the next step.

2. Press and Release the Volume UP and Volume DOWN Buttons to Continue with JBL Wonderboom 2 Check Battery Level

Press and release the center areas of the Volume UP and Volume DOWN buttons at the same time.  Find these areas in the picture shown next. The Volume Up button is in the center of the plus (+) symbol on the speaker front, and the Volume Down button is found in the middle of the vertical minus (-) symbol, just below the plus symbol.

Picture of the front of the JBL Wonderboom 2. Showing the -Volume UP- and -Volume DOWN- buttons. Press these together to check battery level.
Front view of the JBL Wonderboom 2. Showing the -Volume UP- and -Volume DOWN- buttons. Press these to check battery leve.

When you press these buttons together, the speaker makes one to four “blunk” sounds to tell you how high the battery level is.  Four blunks means that the battery has between 75 and 100 percent charge.  Three blunks, and the battery has between 50 and 75 percent charge.  Two blunks denotes that you have between 25 and 50 percent charge in the speaker’s battery.  And finally, one blunk means between 0 and 25 percent charge.

About the Red Power Light

Also, when the JBL Wonderboom 2 battery level gets critically low, the Power lamp starts flashing red, as shown next.

Picture of the red light glowing in the -Power- button. This means that the battery level is getting pretty low. This lamp gives another way to check the charge level.
The red light glowing in the -Power- button. This means that the battery level is getting pretty low. This lamp gives another way to check the charge level.

Press these buttons any time the speaker is ON, to check the battery level.  The number of blunks you hear, lets you roughly guess how much time you have left to play the speaker, before it goes dead.  Since a fully charged Wonderboom plays for roughly ten hours.  So four blunks means that the speaker has between 7.5 and 10 hours of play time left before it goes dead.  Three blunks means that it will play for another 5 to 7.5 hours.  Two blunks means between 2.5 and 5 hours of music time left.  And 1 blunk means that you’ll get between 0 and 2.5 more hours of play time.

Other JBL Wonderboom 2 Posts

    1. How to Turn ON
    2. How to Sync
    3. How to Connect
    4. How to Put in Pairing Mode
    5. Charging Light Explained

References for JBL Wonderboom 2 Check Battery Level

    1. Official JBL Wonderboom 2 Support Page
    2. Where to Buy the JBL Wonderboom 2