Bluetooth Speakers

Sony SRS XB22 Reset Instructions

We give here our Sony SRS XB22 reset instructions to return this wireless speaker to its default factory settings.  Resetting restores the XB 22 to fresh-out-of-the-box state. Plus, it erases any earlier paired Bluetooth devices from its memory. Removing these stops this speaker from pairing to any close by devices. Further, you might reset to get it ready for sale or re-gifting, or to stop it from joining with devices you no longer want it to sync with.

Sony SRS XB22 Reset, Step by Step Instructions

1. Turn the Speaker ON

Press and release the Power button for a half-second or so. Find the Power button as we see in the next picture.

Sony SRS XB22 speaker -Power- button.

Then, the status light comes on, as shown next.

The -Power- lamp glowing.

The XB22 may make a ding-dong tone sound when it powers up, if it connects to a nearby device. Or it may stay silent if not.  But whether the unit syncs or not though, this factory reset routine works the same way, as follows.

2. Press and Hold the Power and Volume DOWN Buttons at the Same Time

Find these buttons as shown next.  They are both on the top button panel, as we point out in the next picture.

The -Power- and -Volume DOWN- buttons.

The XB 22 then enters the reset process.

Then after a small pause, the speaker powers OFF, and the status lamp goes dark, as shown next. Note that on the 22, there is no leaving-the-air sound.

Sony SRS XB22 -Power- lamp dark.

3. Check that your Sony SRS XB22 Did Indeed Reset

Next, turn on the unit again, as detailed in step 1 above.

Note that after reset, the XB22 comes up in discovery mode. The Pairing Mode lamp rapidly blinks blue to let you know this.

The -Bluetooth Status- lamp glowing.

This is a signal that you may then look for this speaker on a nearby BT device, and pair to it if you so desire.

4. Done with Sony SRS XB22 Reset !

The reset is now finished. So you may now sell or gift the 22, or pair it again with your favorite Bluetooth devices.

After resetting, the XB22 no longer automatically joins with any previously paired Bluetooth device. Thus, to resume auto pairing, you must first manually pair it with a device. Then after that, any time that both speaker and that device have Bluetooth turned on, and they’re near each other, pairing automatically take place once again.

Related Posts to Sony SRS XB22 Reset Instructions

    1. Sony SRS XB21 Reset Instructions
    2. Sony SRS XB20 Reset Instructions
    3. Reset Instructions for the Sony SRS XB01 Speaker
    4. Sony Cube Speaker Reset Instructions
    5. Sony SRS X11 Reset Instructions

Other Posts About the Sony SRS XB22

    1. How to Make Sony SRS XB22 Discoverable
    2. Turning Off the Lights on the Sony SRS XB22
    3. How to Pair Sony SRS XB22
    4. Reading the Sony SRS XB22 Battery Indicator Lamp
    5. Sony SRS XB22 Buttons Explained, Meanings, Functions

References for Sony SRS XB22 Reset

    1. Sony SRS XB22 Speaker Product Page at Sony.com

Revision History

    • 2022-07-15: First published.
Tom Hesley

Recent Posts

How to Factory Reset Chromecast

Here, we show how to factory reset the Chromecast receiver.  First, a factory reset restores…

3 hours ago

Chromecast Audio Factory Reset

Here, we offer our Chromecast Audio Factory Reset procedure.  Doing this restores this unit to…

4 hours ago

How to Adjust Bass and Treble on Chromecast Audio

The Google Chromecast Audio receiver now offers basic equalizer controls (bass and treble).  Moreover, you…

6 hours ago

Chromecast Audio Equalizer Adjust Directions

The Google Chromecast Audio offers basic equalizer controls (bass and treble).  Moreover, you set these…

6 hours ago

Connect Google Chromecast Audio Directions

Gives the Connect Google Chromecast Audio Directions. These explain how to plug in to its…

7 hours ago

How to Put Sony SRS XB22 in Pairing Mode

Here, we explain How to Put Sony SRS XB22 in Pairing Mode. You need to…

10 hours ago