The dark CHARGE indicator light on the Sony SRS X3 speaker.
This piece covers Sony X 5 Bluetooth speaker charging instructions. Do this easily through the DC power in port, shown in the pictures below. Note that you can still play your X 5 as it charges, without increasing the recharge time by much, as long as your charger is “hefty” enough.
So to that end, pick a strong enough AC power adapter. We suggest using the one that comes with this speaker from Sony.
Then, insert the barrel end of the cord into the speaker and plug the charger into a working AC outlet.
Finally, after four (4) hours or so, your X 5 finishes recharging. So it’s ready to play once more for up to eight (8) hours before needing another recharge.
The charger you use should provide 12.5 volts and at least 2.5 amps (31.25 watts). Here, we use the Sony AC-S125V25A charger, Now as mentioned, this speaker needs roughly two and a half amps current to recharge fully in the shortest time. So this charger supplies the right amount of power for this job.
Note that the X 5 still charges when booted. But depending on how much above-and-beyond recharging capacity your charger offers, the speaker might charge a bit faster when powered OFF.
Then, plug the small end of the cable into the port on the back of the speaker.
Now that we connected the X 5 and our adapter, we then plug the mains end of the adapter into a working AC outlet, as shown next. We plugged ours into a surge protecting power strip.
The CHARGE lamp lights up solid orange on the top of the speaker. And while no battery status gauge shows percentage of charge, this glowing lamp means that charging is occurring, as shown in the last picture.
Full battery charging is complete when the solid glowing lamp turns off.
We have now fully charged the Sony X 5 speaker.
Finally, repeat this charging every eight (8) hours of use to keep the battery in top shape for years to come.
Many speakers including this one, feature a status light that glows red while charging /…
Many speakers, including this one, feature a status light that glows red while charging /…
Here we cover the Amazon Echo Dot 3rd generation power cable specs. This is the…
The Sony SRS XB32 speaker charging indicator is a small LED light in the back…
Here we cover the Echo Dot 3rd generation power adapter specs. This is the wall…
You must know how to set the Echo speaker to pairing mode to connect it…