An iPhone beside the JBL Clip 1 Bluetooth speaker.
This post shows how to connect a JBL Clip wireless speaker to the iPhone.
With your Clip powered OFF (status lamp is dark), run through this routine to connect it with your iPhone.
Firstly, at the lock screen, swipe up from the bottom to bring up the phone’s Home screen. Shown next.
We found ours on the second page of the home screen, shown next.
Thirdly, tap the Settings app icon.
The mobile device then displays the first page of its settings, as we see.
Tap the Bluetooth item. Our Bluetooth screen then displays, similar to the following.
Note that our Bluetooth is enabled here. If yours shows as OFF, then move the switch item to the ON position as ours is in the last picture.
Now since JBL speaker is currently powered OFF, it does not show up in the Bluetooth devices list. Also, we don’t see it since we’ve never paired this speaker with this iPhone before.
Turn on this unit by quickly pressing its Power button. Find it on the top left end of the button panel.
The speaker then boots and the status lamp on the front starts glowing or flashing blue, as we see next.
The speaker then powers up and makes a rising blip beep sound.
But since the iPhone does not know about this speaker, the JBL Clip will not connect with it automatically. The status light denotes this not-paired state by slow or quick flashing blue.
Now, to see your Clip 1 on your mobile device, place that speaker into pairing mode. To do that, press the Pairing button. Find this button one button to the right of the Power button, as we show next.
The speaker then plays a few rapid fire beeps, and the status lamp on top starts fast blinking blue.
See the screen shot next. We found our speaker, as pointed at by the blue arrow.
Tap the listed speaker in the Other Devices section of the Bluetooth devices list.
Your iPhone then connects with the Clip 1 (named “JBL Clip” in this scenario). The mobile device’s Bluetooth screen then changes to look something like the following.
Finally, we have now successfully linked this little speaker. Similar procedures work with pairing to iPod Touch players, iPad Pros, and any iPhones as well so long as they support Bluetooth. Pairing with Android devices works like this too.
We've brewed several tens of pots of coffee in our Farberware automatic coffee maker. We've…
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…
You can charge the JBL Clip 3 conveniently via the hidden USB charge port. Here,…
The Charge 3 JBL comes with an AC charger adapter, whose specs , type, and…