The Echo Dot 4 with clock alongside a JBL Flip 5 speaker.
Shows how to connect JBL Flip 5 Alexa smart speakers. Now this pairing happens between the JBL and Alexa devices directly. Thus you need not turn Bluetooth on in the mobile device you’re using to create this connection.
Start with your JBL Flip 5 powered OFF (status lamp is dark). Then run through this routine to connect it to your Alexa smart device. We use an iPad Air tablet to set this up.
Firstly, we find the app on the iPad Air as shown in the next shot. So in this exercise, the app is on the third Home screen page.
The app displays its Home screen as we display in the next screenshot.
Then find the hamburger item in the lower right corner of the screen. We point at this with the green arrow in the last screenshot.
This brings up the Alexa app’s main menu, as shown in the next screenshot.
Touching this brings up the Settings screen, as shown in the next screenshot.
Touching Device Settings brings up the All Devices page, as shown next.
From here, choose which Echo device you wish to pair with your JBL Flip 5 speaker.
This takes you to the device-specific settings screen for the speaker you chose.
In this demo, we’re pairing from our Thomas’s 2nd Echo Dot 4 speaker to our JBL Flip 5. Thus the device specific settings screen looks as follows.
Find the Connect a Device option pointed at by the green arrow in the last screenshot.
This brings up the Setup screen, as shown next.
At this point, your Alexa device scans for nearby Bluetooth devices that are in pairing mode. Here, we selected an Echo Dot 4 earlier. So, this speaker will be the one that scans for BT devices.
Note that our Dot speaker found no devices so far. But it will in the next steps.
Bring the speaker close to your Alexa device to pair. Then power up the Flip 5 by pressing and releasing the Power button.
Put your JBL Flip 5 into pairing mode by pressing and releasing the Pairing button.
When you put the speaker into discovery mode, it should then appear in the Alexa app Pair Bluetooth Device… page.
Note that if your speaker does not show up on this page, then try the following.
Plus, we usually find that this gets the speaker to appear here as it should.
See the last screenshot above. The test Flip 5 speaker is there.
Then pair to the BT speaker by tapping the listed speaker on the Pair Bluetooth Device… screen, shown in the last screenshot above.
Your Alexa speaker then pairs with the JBL Flip 5.
The app then takes you back to the Thomas’s 2nd Echo Dot 4 screen, which looks something like the following.
Note that our Bluetooth speaker now shows as connected. Also, the Flip 5 makes the Speaker Paired sound (the three ascending guitar notes).
This Bluetooth speaker now has a connection with your Alexa speaker. So its Bluetooth light glows solid white to signal that successful pairing is in effect.
At last we can now ask Alexa to play music. Then those tunes will come out of the Flip 5. Be sure though, to speak to the Alexa speaker when making requests, and not the BT speaker. Why? Because even though the Flip 5 now has a connection, the Alexa is still the speaker that receives voice commands.
We've enjoyed hot instant coffee and tea for more than a score now. So these…
Why would you need to perform Honeywell RTH8580WF wireless setup for this common thermostat ? …
We've brewed several tens of pots of coffee in our Farberware automatic coffee maker. We've…
We've brewed several tens of pots of coffee in our Farberware automatic coffee pot. We've…
Why would you need to perform Honeywell RTH8580WF WiFi setup for this common thermostat ? …
Gives a safe routine to defrost a freezer fast with a heat gun. now a…