Here, we explain how to reset Ultimate Ears Wonderbooms. This restores the factory default settings to these speakers, and can often fix some pairing errors. Reset works as follows.
Resetting Ultimate Ears Wonderboom wipes any memorized Bluetooth devices from memory. Clearing this data prevents the UE from pairing to any nearby Bluetooth devices after the reset. Further, you might reset the Ultimate Ears Wonderboom to re gift it. Or, you just wish to stop its auto pairing with devices you no longer play through lt.
Press and release the Power button. The status lamp in that button lights and you hear a power-up sound. We’ve circled the Power button in the next picture.
Then, the status light comes on solid or it blinks, as shown next.
The Ultimate Ears Wonderboom makes a unique sounding turn-on noise. The UE is then ready for reset when this sound finishes. It may or may not pair with a device. That depends on whether you have any in-range Bluetooth devices that know about this Ultimate Ears and that it have previously paired with as well. Whether paired or not, reset works the same way, as follows.
Ultimate Ears speakers do not reply to reset requests while connected with a source Bluetooth device. So, unpair the Wonderboom before resetting.
Find the Power and Volume DOWN buttons. The Power button is on the top, near the front. Volume DOWN is the long vertical line on the front, near the bottom. See these both pointed out by the green arrows in the next picture.
Ultimate Ears then enters reset. Then, in a few seconds, the unit powers off when reset wraps up. The falling electronic kar-plunk sound goes off. Then the status light in the Power button goes dark, as shown above.
Next, power on the Wonderboom again, as detailed in step 1 above.
After a reset, Ultimate Ears comes up in ready-to-pair mode again, with the pairing lamp rapidly flashing white.
Reset is done now. So go ahead and let someone else use the speaker. Or pair it once more with your favorite Bluetooth devices.
After a reset, the Wonderboom no longer auto connects with any prior paired Bluetooth devices. Thus, to set up automatic BT pairing, you pair by hand the Ultimate Ears with your desired device(s). Then any time that both the Ultimate Ears and device have Bluetooth turned on, pairing again occurs without you having to do anything.
Don’t forget to delete any now-stale connections to the Wonderboom from your source Bluetooth devices that you set up prior to resetting. These will no longer work. So you’ll want to “forget” them in your source device’s settings pages.
This post offers general Ultimate Ears speaker pairing directions. Start with your speaker powered OFF…
Whether you're hiking in the Himalayas, biking in the Andes, running the New York marathon,…
Whether you're hiking in the Himalayas, biking in the Andes, running the New York marathon,…
We are aware of potentially dangerous chemicals found in many of today's plastic-based hot-foot lunch…
We are aware of potentially dangerous chemicals found in many of today's plastic-based hot-foot lunch…
Sound Check in iTunes and iPods is about the same as Winamp’s Replay Gain feature.…